MPSM Handy Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy tool holder with hooks for the back of your Monoprice Select Mini. 2 versions available.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 3
- Wyświetlenia
- 303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
UPDATE: Added an alternate version (currently untested) with the following changes:
- New slim dedicated section for a scraper (this one - scraper model 2)
- Wider general tool pocket behind the scraper section
- New EDC utility blade slot (for this one)
- Reduced support wastage and material use by removing most of long flat top lip
- Reduced the gap between the printer body and the main body of the tool holder by 0.5mm (which now causes a tiny lip which I'll fix in a future version)
A handy tool holder for the back of your Monoprice Select Mini V2.
This is another thing I designed purely to get to grips with Fusion360, but this time something I actually needed. The main reason was to have a safe place for my Scraper Handle as I have small people in the house, but it's handy for iFixit drivers, tweezers, pens etc, plus I added a dedicated holder for the MPSM hex key. I also added hooks on the back for 'things', where I currently keep my EDC Utility Blade Holder.
I printed it right-way-up, adding supports for the ledge with the screw holes, that way the hooks on the back came out clean (the hooks shouldn't need supports due to the angles). Took about 6 hours at 0.175 (I think), plus my first layers are dead slow. Printed with 3DQF Jet Black PLA.
If you like it/print it, show us your make!