Liczymy pasujące modele…
The mini SD card used by the Monoprice Select Mini is difficult to handle and can easily be lost. This simple handle permanently holds the card and can be easily inserted into the MPSM slot as well as SD card readers. The card fits…
This is an upgrade for the Monoprice select mini. Board and display is swapped to SKR v1.3 with TMC2208 drivers and TFT24 display. Printer is running silent with Marlin 2.0 and all safety features turned on. Required components:…
I figured that if I'm going to be staring at my printer while leveling the bed, it might at least be interesting. This should be printed without any build plate adhesion, and infill and support doesn't matter. I've included a basic file…
Printing as 100mm square, set layer height to .13125. Category: 3D Printing Tests
Cool your PCB stepper drivers with a 30mm fan. Includes nut traps for easy fan swaps.
Tired of looking at a placeholder bed in PrusaSlicer when you are slicing models for your Monoprice Select Mini? Stare no more! just set these STLs in the Printer configuration for your Monoprice Select Mini and get a digital…
The original arm had wide holes and I prefer simple bowden solution. Made the holes smaller and made some space for the bowden tube holding by a screw. All modification are made in PrusaSlicer. Open the project and adjust to your needs.…
This is a fan shroud for MPSM v2 which holds 2x 40mm noctua fans and provides separate hodend and part cooling. No further disassambling of your MPSM is needed. Just remove the old fan shroud and relpace it with this one. I also added a…
UPDATE: Added an alternate version ( currently untested ) with the following changes: New slim dedicated section for a scraper ( this one - scraper model 2) Wider general tool pocket behind the scraper section New EDC utility blade slot…
Simple tool holder for the Monoprice Select Mini V2. Holds a couple of pliers, a scraper, a couple mini-files and a couple of allen keys. Does not interfere with the motion system. Re-uses the bolts of the printer. Prints upside down…
EDIT: A remix of LazaroFilm's https://www.thingiverse.com/thing:2811140 I wanted a tighter fit and since there are no wires on the left side, I closed the U cutout. Fits fantastically on my Monoprice Select Mini v2 Q4of 2017 edition 3D…
After trying to create a complicated flexible standalone mount for my Monoprice Select Mini Pro, I realized there was a prime mount location for my smartphone webcam right on the end of the gantry. This mount is designed to hold a…
A spacer to adapt almost all knob-types from other printers to the Monoprice Select Mini II. It should work for all Minis and all knobs with 6mm holes.
Mounts on build plate platform. no additional hardware required.
Quick remix to center the wire mount. I haven't tested it yet. Category: 3D Printer Parts
This little piece is used to adjust the left side of your Monoprice Select Mini x-axis endstop switch. I created this because I noticed that the MPSM has a print area of 120mm, but the bed itself is 130mm. With this stop in place, the…
Needed to remix this part to fit on the mounting holes of the Select Mini v3/Pro and cut a corner out so the y-carriage would not crash into it. Not perfect but mounts and works well. Category: 3D Printer Parts
I needed a taller version (don't ask, long story) so I just added 3mm Category: 3D Printer Accessories
If you are like me and keep assembling to fast then you forget to run the wires through the back hole that attaches to the panel and the connectors do not fit so I resized that back port to fit the connectors after soldering lol Front…
This is a really old model I made in 2021 which improved the usability of the MonoPrice Select Mini V1. I always had trouble using the microUSB and SDCard so this panel has a recess so you can't miss it. It also has a 40mm fan mount with…
This project provides a custom mounting solution for upgrading the Monoprice Select Mini v2 3D printer with a BigTreeTech SKR Pico mainboard and a Raspberry Pi 3A(+). The SKR Pico can handle 12v and 24v, so I took the opportunity to…
MINIMONOPRICE The Mini Monoprice Mini To teach myself modeling and 3D printing I've started working on a 1/3 ischz scale model of my Monoprice Select Mini, my first printer that I just recently bought and am loving the hell out of! I…
This project provides a custom mounting solution for upgrading the Monoprice Select Mini v2 3D printer with a BigTreeTech SKR Pico mainboard and a Raspberry Pi 3A(+). The SKR Pico can handle 12v and 24v, so I took the opportunity to…
I added Scanjo's MPSM 45 degree mount ( https://www.thingiverse.com/thing:3243485 ), but lost my ability to use Bobarilla's filament guide remix, so I remixed it again. Just a quick and dirty swap on the ball to the back and extended it…
Remix of this great mount by clearchris. Mostly just customized the holes and made a simple backet for my BLtouch v3. Heigh is not adjustable but should be set correctly from the mount already. Still a work in progress since i'm not in…
Thanks for the excellent fan mount from kbowley . I also liked the mounting design from tgeehan & keco185 . Unfortunately both of these seem to cause uneven cooling with the 40mm fan. I have modified kbowley's design by adding a support…
See original for installation instructions: https://www.thingiverse.com/thing:2029972 My original printing broke right above where the bowden tube and nut fit. Also, my MPSM has a thinner nut than the original accounted for. To fix those…
This is an upgrade for the Monoprice select mini. Board and display is swapped to SKR v1.3 with TMC2208 drivers and TFT24 display. Printer is running silent with Marlin 2.0 and all safety features turned on. Components required:…
Combined the two models to fit the printer. Print facing the fan mount down and with support touching build plate. After printing you can cut off the small supports from the mounting clips. The duct may collide with the tower housing. It…
Updated version of the 2 part panel remix Thing https://www.thingiverse.com/thing:2516945 . Finally got around to printing it (used my Monoprice Maker Select) Very pleased with the outcome
