Combined built plate, tool and accessories holder for Creality K1/K1C.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model includes a rack for two build plates, the tools that came with Creality and your own accessories.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 267
- Wydruki
- 1
- Wyświetlenia
- 1596
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This model includes a rack for two build plates, the tools that came with Creality, and your own supplies such as glue, IPA, USB memory stick etc.
You only need 4 pieces of M3x8 (or M3x10) screws to connect this to the side wall of the K1/K1C.
The accessory box is built from four different parts, the box itself and three different tool holder departments that are installed inside the box. This solution gives you good flexibility and you can use these tool holders I made or you can make your own according to your needs.
I had to re-drill the smallest holes to get the tools to fit in.
I personally used glue to connect the tool holders to the box, but it's not necessary.