1 / 2
Lamp V9
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cone lamp with a zig zaggy pattern on a quadpod.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane

The holder is made for a light blub socket with the following dimensions:
5.75 cm tall and 4 cm in diameter.
And the hole for the wire is roughly 0.6-7 cm in diameter.
The base can be printed upside down with no support but add brim to enable good plate adhesion.
The lampshade must be printed with no bottom in vasemode!
Check the print file for the lampshade to see how I printed it.