Lamp V9
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.49 – €6.71 net (excluding VAT)
For file: base_0.6n_0.2mm_PLA_MK3S_6h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.10 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 6.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cone lamp with a zig zaggy pattern on a quadpod.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 81
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike

The holder is made for a light blub socket with the following dimensions:
5.75 cm tall and 4 cm in diameter.
And the hole for the wire is roughly 0.6-7 cm in diameter.
The base can be printed upside down with no support but add brim to enable good plate adhesion.
The lampshade must be printed with no bottom in vasemode!
Check the print file for the lampshade to see how I printed it.