TP-Link POE Injector Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for TP-Link POE injectors (created for the TL-POE150S, but might work with others too).
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple wall mount for TP-Link POE injectors.
I created the model for the TL-POE150S which is the one I have, but it should work with other injectors too as they are similar.
You will need to print it twice, one for each side. The injector slides into the mount and can then be screwed in onto a wall, under a desk, etc.
The screw holes are 5mm in diameter.
Keep in mind that it might look like it doesn't fit at first. It's intended to be a snug fit.
Note: If you try it with another injector (other than the TL-POE150S), leave a comment/review so people know it works with the model you have.
Other models that work
- TL-PD30G-M2 2.5G PoE+