lightweight Bike Light handlebar mount 32mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to mount a light onto a 32mm handlebar
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Took the idea and made my own interpretation of it. Its actually not really a remix, because I changed most of the drawingh.
I made it a little bit more lightweight and adjusted the mounting bar to fit my lights.
Although I changed the mounting to M5 thread, the “arm” is still compatible with the other designs - because it has a 4,2mm hole. Either to put a M4 screw through or to cut a M5 thread.
Also it fits quite narrow around the handlebar clamp
Distance between the clamps is 45mm and the mounting bar is 70mm long
You need M4x20 screws for mounting on the handlebar. I cut the thread for M4.
For the light holder you need M5x10 or longer if you add a hex nut.
The lamp is mounted with M4 or M5 screws. There is also a variation if you prefer countersunk mounting. So choose one of the four parts.
For the moment mounting worked as expected. We'll see how it holds up.
If you have any feedback or change requests, just leave an comment.
Likes are always appreciated.