Build Plates Dryer - bent plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of drying my bulid plates on the sink, falling every time… therefore I've designed a decent dryer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
I was tired of drying my bulid plates on the sink, falling every time… therefore I've designed a decent dryer.
And here it is - dryer in a form of bent build pate :) I hope it will be useful.
You can dry up to 3 plates at the same time.
There are 4 variants:
- P1/X1 plate
- P1/X1 plate with droplets
- A1 mini plate
- A1 mini plate with droplets
A1 mini plates are a bit smaller than the rest but still can handle the big plates.
You can use it as a regular stand for the plates as well.
Printed with PLA Metal:
- 0.4mm nozzle
- 0.2mm layer height
- 2 walls
- 8% honeycomb infill
I've printed it on the SuperTack build plate as it have some narrow areas and I strongly recommend doing the same.
Try brims if you don't have SuperTack plate (but you should really get one as it makes life much easier).