Build Plates Dryer - bent plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was tired of drying my bulid plates on the sink, falling every time… therefore I've designed a decent dryer.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Standard Digital File License
I was tired of drying my bulid plates on the sink, falling every time… therefore I've designed a decent dryer.
And here it is - dryer in a form of bent build pate :) I hope it will be useful.
You can dry up to 3 plates at the same time.
There are 4 variants:
- P1/X1 plate
- P1/X1 plate with droplets
- A1 mini plate
- A1 mini plate with droplets
A1 mini plates are a bit smaller than the rest but still can handle the big plates.
You can use it as a regular stand for the plates as well.
Printed with PLA Metal:
- 0.4mm nozzle
- 0.2mm layer height
- 2 walls
- 8% honeycomb infill
I've printed it on the SuperTack build plate as it have some narrow areas and I strongly recommend doing the same.
Try brims if you don't have SuperTack plate (but you should really get one as it makes life much easier).