ESP32 Enclosure with INMP441 mounting for WLED setups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small enclosure for ESP32-WROOM boards from AZDelivery with integrated spot for INMP441 microphone for WLED setups
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1014
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An ESP32 enclosure for WLED setups with an optional housing for INMP441 I2S digital microphone for soundreactive-awesomeness. The ESP32 boards that I use are from AZDelivery (Amazon Link)
The enclosure has snap-on cover and two design options, one with mounting wings for screwing it into desks (see attached picture) or without. I often print those in PETG or ABS-GF.
Note that you'll need supports for printing the version that has mounting brackets. Supports are only needed to support the overhangs of the mounting wings.
If you need a mounting bracket for your LED aluminium profiles, check out my design