Tonie figures UFO wall shelf with glow in the dark effect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tonie figures UFO wall shelf for up to 8 Tonies with glow in the dark effect.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tonie Figuren UFO-Wandregal für bis zu 8 Tonies mit glow in the dark effekt.
English description below
Ich habe dieses UFO-Tonies Regal für meinen Sohn konstruiert.
Das UFO ist 1mm Höhe mit AMS, 3 verschiedenen Farben unter anderem einem Glow in the Dark Filament gedruckt und dann auf die Farbe grau gewechselt um Filamentpoop und Zeit zu sparen . Kann natürlich auch nur in einer Farbe gedruckt werden. Auf der Rückseite ist ein Schraubenhaken konstruiert für eine Standard Holzschraube max. Ø4mm.
https://amzn.eu/d/eEjo4SX
Im Tonies Brett sind 4 Stück, M4 Kotflügelscheiben nach DIN 522, mit Druckpausen eingelegt.
1. Pause bei Layer 12 (2,4mm)
2. Pause bei Layer 27 (5,4mm)
Schichthöhe 0,2mm
Die Kotflügelscheiben können normalerweise bei jedem lokalen Baumarkt gekauft werden.
https://amzn.eu/d/hqW5hEq

d1=4,3mm
d2=20mm
h1=1,25mm
Wenn dir mein Design gefällt bitte like es, booste es und poste ein Bild deines Druckes.
Viel spaß damit und schau dir auch meine anderen Tonies Regale an :)
-------------------------------------------------------------------------------------------------------------
Tonie figures UFO wall shelf for up to 8 Tonies with glow in the dark effect.
I designed this UFO Tonies shelf for my son. The UFO is 1mm high with AMS, 3 different colors including a glow in the dark filament and then changed to gray to save filament poop and time. Can of course also be printed in just one color. A screw hook is designed on the back for a standard wood screw max. Ø4mm.
The Tonies board contains 2 pieces, M4 fender washers according to DIN 522, with print breaks.
1. Break at layer 12 (2.4mm)
2. Break at layer 27 (5.4mm)
Layer height 0.2mm
The fender washers can usually be bought at any local hardware store.
https://amzn.eu/d/hqW5hEq
d1=4.3mm
d2=20mm
h1=1.25mm
If you like my design please like it, boost it and post a picture of your print.
Have fun with it and check out my other Tonies shelves too :)