1 / 3
Bose QuietComfort 35 adapter for V-MODA BoomPro Microphone — zdjęcie 1
1 / 3

Bose QuietComfort 35 adapter for V-MODA BoomPro Microphone

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows easily and securely attaching and removing a BoomPro microphone using a 3.5 to 2.5 mm jack adapter.

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
0
Wyświetlenia
266
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution

This model was specifically sized for a Vention 3.5 to 2.5 female to male jack adapter [1].

The BoomPro and the jack adapter slides into the printed part and they lock securely on their own. The whole assembly then can be easily plugged in and out of the QC 35.

Without the printed part the whole assembly is very wobbly and insecure.

I tested the model with PETG and PLA Matte filament as well using a 0.4 mm nozzle. Both worked fine. I think it's good if the filament has a bit of springiness, so pure PLA could be too brittle.

On the right face the model can be printed without supports.

[1]: https://www.amazon.com/VENTION-3-5mm-Female-2-5mm-Male/dp/B07NSVBVQN

Tagi