Bose QuietComfort 35 adapter for V-MODA BoomPro Microphone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows easily and securely attaching and removing a BoomPro microphone using a 3.5 to 2.5 mm jack adapter.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This model was specifically sized for a Vention 3.5 to 2.5 female to male jack adapter [1].
The BoomPro and the jack adapter slides into the printed part and they lock securely on their own. The whole assembly then can be easily plugged in and out of the QC 35.
Without the printed part the whole assembly is very wobbly and insecure.
I tested the model with PETG and PLA Matte filament as well using a 0.4 mm nozzle. Both worked fine. I think it's good if the filament has a bit of springiness, so pure PLA could be too brittle.
On the right face the model can be printed without supports.
[1]: https://www.amazon.com/VENTION-3-5mm-Female-2-5mm-Male/dp/B07NSVBVQN