NATO 40mm Gas mask to 3M 7502/6800 respirator filter adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 998
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread.
You can copy and edit the original file here: https://cad.onshape.com/documents/c4dfbe4e142232dd98bdb37d/w/f75a6b03ec3fabc3272a6957/e/48e1c90298f4e3d21a97e2b2?renderMode=0&uiState=67844039117d8c261895d278
The fit is good with the 2097 particulate filter I tested it with. I found the air flow resistance is not as good as a standard gas mask cartridge, but it is much lighter.
I printed in PETG and the seal is quite good, however TPU would probably give a better seal. I used MK3S+
- Layer height 0.30mm
- Supports on for the 3M adapter part only, not the threads
- Bed surface: PVA gluestick on PEI bed
- Infill: 5%