1 / 4
NATO 40mm Gas mask to 3M 7502/6800 respirator filter adapter — image 1
1 / 4

NATO 40mm Gas mask to 3M 7502/6800 respirator filter adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks.

Rating
0 / 5
Likes
19
Downloads
164
Makes
0
Views
998
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread.

You can copy and edit the original file here: https://cad.onshape.com/documents/c4dfbe4e142232dd98bdb37d/w/f75a6b03ec3fabc3272a6957/e/48e1c90298f4e3d21a97e2b2?renderMode=0&uiState=67844039117d8c261895d278

The fit is good with the 2097 particulate filter I tested it with. I found the air flow resistance is not as good as a standard gas mask cartridge, but it is much lighter. 

 

I printed in PETG and the seal is quite good, however TPU would probably give a better seal. I used MK3S+

 

  • Layer height 0.30mm
  • Supports on for the 3M adapter part only, not the threads
  • Bed surface: PVA gluestick on PEI bed
  • Infill: 5%

Tags