1 / 1
Low Hardware Washer BCAR for 16mm barrels and DZ muzzles — zdjęcie 1

Low Hardware Washer BCAR for 16mm barrels and DZ muzzles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles.

Ocena
0 / 5
Polubienia
14
Pobrania
38
Wydruki
1
Wyświetlenia
437
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles. No barrel stop, so just make sure to stop before it touches the washers.

5,6,7,8,10,12,15 degree options available. Can add more if requested.

Custom option: Build your own combination of angles in slicer by aligning and stacking chunks.

align shroud against washers to either increase friction and crush or leave it stock

Sand pins if necessary.

can print without supports. pinholes may droop a tad

Tagi