1 / 1
Low Hardware Washer BCAR for 16mm barrels and DZ muzzles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 37
- Makes
- 1
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles. No barrel stop, so just make sure to stop before it touches the washers.
5,6,7,8,10,12,15 degree options available. Can add more if requested.
Custom option: Build your own combination of angles in slicer by aligning and stacking chunks.
align shroud against washers to either increase friction and crush or leave it stock
Sand pins if necessary.
can print without supports. pinholes may droop a tad
