M6 Wingnut wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printed wrench to save your fingers and keep your speed up when moulding or demoulding fiberglass
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
i developed these about 5-6 years ago now during a period of time where i was doing back to back fiberglassing jobs. they have a spot on the front for a 10mm circular magnet and a lanyard loop, making them easy to keep acessible while you work in the mouldshop.
they save your fingers from caught and stuck bolts, are easier to use than pliers and mean there is zero chance of a spinning bolt driving a fiberglass/resin shard under your fingernail.
i reccomend printing in PETG with solid infil for at least the bottom section where the wrench is. these are designed to be quick and cheap to replace when you get too much gunk on them or they break.
i would not reccomend doing a quick block mould and using it as a way to use excess resin, polyester and polyurethane resins are too brittle to use for a wrench. if you have tons of excess resin use please just mould a tube and make blanks for your machinist friends!