Provolone Ranger - 150g Antweight Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It Aint Easy Being Cheesy
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Provolone Ranger - A simple 150g fighting robot, designed for a fun time, not to be a serious competitor despite its win rate.
Uses 3x N10 motors, one for the manipulator arm and two for drive.
Uses standard N20 mounts for the motors with countersunk M2 screws to hold them down, and 3mm Plastite screws to hold the body together.
A 3mm flange mount is used for the arm, and standard 34mm pololu wheels for the drive.
The Upper can be printed in one piece, or two pieces and melted together, I had difficulty getting it to work on an untuned printer, so splitting and worked better for me.