Collapsible Monitor Stand for FormD T1 V1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collapsible Monitor Stand to put on top of the FormD T1 V1.1. Can also be used on the desk directly.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a collapsible monitor stand to put your monitor or tablet at eye level on the FormD PC case. It holds a 10mm or 12mm thick monitor/tablet with adjustable viewing angle. The feet, 135.2 mm apart from each other ( width of FormD T1 V1.1), fold out and can grip the case with 15mm dia, 3mm thick magnets. The holder is 100mm wide.
UPDATE 1:
I added a 120mm wide version which fits perfectly fits over 1 fan, reducing the air obstruction.
UPDATE 2:
Added V2 of Base 120mm, with sunken holes for the screws and some minor improvements
Print Settings:
-0.2mm layer height. make it resilient with 3+ walls
-no support, everything is designed to be printed with without support
-use petg, otherwise it might melt due to the PC heat
-pause the foot to insert the magnets
What u need:
6x M4x 20mm (to mount the pieces together) for base_120mm_V2 use M3x14mm or 15mm screws instead
2x Round magnets (15mm dia x 3mm thick)
2x M3x10mm (to mount the strut)
2x M3x10mm-15mm (to mount the chin)
2x M3x 30mm (inside the horizontal strut part are 2 30mm screw to reinforce this part, especially when it gets hot) this is probably not necessary but better save than sorry haha