1 / 8
Collapsible Monitor Stand for FormD T1 V1.1 — image 1
1 / 8

Collapsible Monitor Stand for FormD T1 V1.1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a collapsible Monitor Stand to put on top of the FormD T1 V1.1. Can also be used on the desk directly.

Rating
0 / 5
Likes
11
Downloads
27
Makes
0
Views
754
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

This is a collapsible monitor stand to put your monitor or tablet at eye level on the FormD PC case.  It holds a 10mm or 12mm thick monitor/tablet with adjustable viewing angle. The feet, 135.2 mm apart from each other ( width of FormD T1 V1.1), fold out and can grip the case with 15mm dia, 3mm thick magnets. The holder is 100mm wide.

UPDATE 1:

I added a 120mm wide version which fits perfectly fits over 1 fan, reducing the air obstruction. 

UPDATE 2: 

Added V2 of Base 120mm, with sunken holes for the screws and some minor improvements

Print Settings:

-0.2mm layer height. make it resilient with 3+ walls

-no support, everything is designed to be printed with without support

-use petg, otherwise it might melt due to the PC heat

-pause the foot to insert the magnets

What u need: 
6x   M4x 20mm (to mount the pieces together) for base_120mm_V2 use M3x14mm or 15mm screws instead

2x   Round magnets (15mm dia x 3mm thick)

2x   M3x10mm  (to mount the strut)

2x   M3x10mm-15mm (to mount the chin)

2x   M3x 30mm (inside the horizontal strut part are 2 30mm screw to reinforce this part, especially when it gets hot) this is probably not necessary but better save than sorry haha

Tags