Watercool MORA4 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base Stand Feet for the Watercool MORA4 Radiators.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Base Stand / Feet for the Watercool MORA4 (MO-RA) Radiators.
Works on the 200, 400, 600 versions of the radiator. Only tested on the 400.
Dimensions 150 x 50 x 25mm.
There is enough espace for mounting both grills (front and back) and some room left for air circulation if the radiator is ever put next to a wall.
You will need per stand :
- 2 x M4x16,
- Though M4x20 or less should work too with a spacer, nut, or watchers. Try at your own risk.
Print Instructions :
- Printed in PETG.
- PLA should work.
- 0,4 Nozzle.
- Bigger nozzles should work the same. Not Tested.
- No Supports needed.
- 2 Perimeters are enough for MORA4 200 and MORA4 400.
- 10% Infill, grid or gyroid is enough for MORA4 200 and MORA4 400.
- For MORA4 600 I advice you print with additionnal perimeters and infill.
NDA :
The indentation on the side allows to hide the start and end of every layer's perimeters and reinforces the part with additionnal perimeters.
I'll be uploading the f3d and step files in the future after cleaning the models' structure.