Liczymy pasujące modele…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
This is possibly the smallest PC Testbench with dual 360mm Radiator Support. It has mounting for ATX motherboards and therefore also ITX. mATX can be mounted as well but is not supported on the bottom two screw holes. eATX should also…
Set of different hose clamps for closed circuit water cooling Universal for hoses of 10/11 mm, see schematics in pictures. 6 different Heights: 12 mm, 15mm, 20mm, 25mm, 30 mm, 35mm 5 different Lengtes (Center-to-center): 25mm, 30mm, 35mm,…
I hated the double sided Corsair watercooling mount for the pump so I designed a cleaner looking mount. This mount is designed to be a direct swap for the Corsair mount. You will need 4 3mm nuts and 4 3mm x 10mm long screws to mount to…
On my build I had a very tight double bend I needed to make with 16mm PETG, I wasted about 500mm before I decided to CAD it up, print a mould out of ABS and bend the tubing that way. I uploaded pictures to reddit and many people asked for…
This is a printed stand for the Mo-Ra3 420 radiator for watercooled PCs. It might also fit other Mo-Ra generations or sizes. I haven't checked them. It's inspired by the original POM stand from Watercool. For mounting you need 4x M3…
I use this to watercool my K40 laser, the piece is a pass through on a water bucket cover. This is my first Freecad project, I'm still learning. I hope the FCStd file is clean enough. It's compatible with flexible silicone tube ID 6mm x…
Print laying down with 100% infill, 0,2 mm layer height.
Introducing the innovative 3D-designed part specifically engineered to revolutionize your liquid cooling setup for the Ender 3 S1 Pro 3D printer. This meticulously crafted component, with a thickness of 10mm, boasts a superior build…
This is for custom watercooling tube bending with acrylic or PETG, allows you to get a 90 degree bend with a 25mm radius. This was made to fit 14mm tubing, I have not tried bending a smaller tube on this. I printed it in PETG and it…
Hard tube Bending Jig for 14mm Pipes
All parts are made from 7075 aluminum, except for the fanduct, which is 3D printed in aluminum. The cost for one full set is around $250, excluding shipping and taxes. All threaded holes are M3 and tapped using a blind hole tap. It's…
I designed a small Tool to accurately bend hard tubes for your Watercooling setup. Worked really well for me. Its designed for 12mm Hard tubes ( I used EKWB 12mm clear tubes ) Use low layer heights for better results an smooth radii. I…
The ProArt PA602 Low-Profile Watercooling Adapter is a custom-designed 3D printable accessory that addresses the limitations of the original PA602 case. While the PA602 case typically allows for radiators up to 34mm in thickness, this…
I created this some time ago so I could store my fittings in a way that made them easy to organize and find when needed. It also prevents damage from them rattling around in bags as their surfaces are often fragile. The spacing is wide to…
PC water cooling plug O ring ready - Buy link: https://tinyurl.com/KShirza Print ready No supports
Cooling a CPU+GPU water loop with a single 200mm radiator/fan was a concept I proved with my last 3D printable case . It was time for an upgrade, and I wanted to design something with more hardware compatibility and customizability. I…
Base Stand / Feet for the Watercool MORA4 (MO-RA) Radiators. Works on the 200, 400, 600 versions of the radiator. Only tested on the 400. Dimensions 150 x 50 x 25mm. There is enough espace for mounting both grills (front and back) and…
Did not wanna pay for an expensive pressure tester.. Made this and tried to make it easy to print. When I tested my loop with it, it held pressure for more than 15 minutes at 0.45 bars (~6.5 psi). Used the same type of O-ring that came…
This is a mount to fix a heatkiller pump/reservoir combo on a Watercool MoRa 3. You need to print one of each parts. The two bracket halves are held together by 2 M3x30 bolts. There is no hex nut needed, the thread should hold well in the…
This handy tool allows you to create storage boxes for Zach Freedman's Gridfinity system that are specifically designed around storing small, round items such as PC Watercooling fittings! The file is parametric and even better, fully…
Edit 27/01-2025: Added new and revised files after some extensive testing. Duct and mount for 3DO nozzle Cam V2. 8 x M2x8mm selftapping screws, 2 x Heat set inserts (Voron kind) and 2 x M3x6mm BHCS screws required. Also, if using the…
Needed to upgrade watercooling setup for couple of my PCs and thought that why not design my own reservoir? So this is the first design and I printed couple of these using PETG and Filaflex for gaskets. Designed for immersive pump, Im…
Allows flexibility on where the reservoir is vertically installed. The bracket can be mounted onto a 120 mm spacing fan or radiator. Print with supports for the large overhang.
I have not been able to successfully print this. I'm hoping that it's possible to print with resin. Leaks like a sieve with FDM. The horizontal layer lines make it unusable. Just posting this in case someone can figure out how to make it…
This is an AIO CPU Watercooler hose distance bracket with changeable label and a Print in Place hinge. The label can be attached in different positions. I use this hose spacer on my ROG RYUJIN 360. The hose has a diameter of 10mm. Print…
This is alpha at the moment! I have a few of the plates ordered through PCBWay - once I install this on my VCore, I will adjust the model as needed and post an update here. Update 01/15/2025 : Beta now. It is being tested and tweaked by…
After Ive created a Remix of SirCBO Design for the Dynamic XL I was done with it and only used it for Cables.... Meanwhile Ive changed a lot in my System and I am Planning to lead my softubes to the backside of the Case and from there to…
Just a plate where you can fix all the G1/4 fittings you have, so they don't move in the box or where you want to put them. There are 3 versions, 3x3, 5x3 and 5x5, just print them at 0.15 or lower so the thread works fine. I also added a…
Hello everybody, my latest project is an SFF computer with a volume of around 7.4 liters. The hardware components currently installed are not the best, and I plan to upgrade at least the GPU in the near future. Specs: MSI B450I Gaming…
90 degree bend tool for 16mm PETG tubing. Print in ABS/Nylon/ASA unless you want a horrible mess!
This is a support for a watercooling pipe with the diameter of 9,5/12,7mm. You will need to print it two times to get both sides. You will also need two zip ties with a maximum size of 3mm in width and 1.5mm in height. No supports are…
Hello, for my latest project, I designed two water blocks to be used in my custom SFF PC build. The CPU block is designed to fit standard AM4 motherboards, while the GPU block is intended for a Zotac GTX 1060. The cooling plate inside…
Since our GUZZANTI GZ 24DD wine cooler with Peltier cooling system (thermoelectric couple) was not working as it should, I decided to modify it and replace the factory heatsink with a water-cooling system. The provided models are used to…
DE: Gehäuse für eine Wassergekühlte PS4 Hier zum Projekt Video: https://youtu.be/dYaawz0kWII EN: Case for a watercooled PS4 Link to the project video:
Pla 20% preenchimento 3 paredes
You will need the mountingplate for the Heatkiller Tube from Watercool for this. Simple mounting adaptor for the mountingsystem from Aqua Computer. I used an other decoupling kit with M4 screws, so you will have to drill the holes on the…
This is my one day take on the challenge presented by corsair! Enjoy a custom water loop aesthetic and keep the convenience of an AIO! This design supports RGB strips, the tubes have a passthrough for leds and wires are routed to the top…
Watercooling Wakü PC bracket holder for 16/10 hose and 120mm fan mount rail
An experiment in the properties of 3D printing resin, in the form of a watercooling radiator with a small internal reservoir, designed to fit a 30MM computer fan. A cutaway model has also been provided so you can observe the fluid paths.…
A wrench for tightening Bykski hardline watercooling fittings. Save your fingers trying to tighten fittings my the threads. Only tested with Bykski “Anti-Off” hardline water cooling fittings , Its a pretty tight fit so you may need to…
Printed with PETG for temperature resistance and flexibility.
inserts for brass thread <-> pneumatic tubing fittings and 40mm internal diameter G1/4 reservoirs Reduces Pump noise and the reservoir looks better the brass part of the fitting has a cavity of 10.5mm depth and ≥9.6mm width. The insert…
Based on my model for fans: This mount allows you to install a radiator or an AIO at an angle inside your PC case. Because of the thicker size of the radiators compared to fans alone, this uses 140mm fan mount points. This lets you direct…
no need to do anyting. i printed in 0.3
When I had my MO-RA on my desk with the res, I never liked the fact that the terminals and res mount were on the same side. I wanted to be able to see and access the res from the “front,” but have the tubing and wiring exit the “back” so…
Watercooling Mount for 1 fan radiator if you need to use it in a non compatible case or even outside the case
None of the ITX cases on the market were exactly what I wanted. I decided to put together something more custom. Article on All3DP . More pics and build details here . NOTICE: This project was put together for very specific components.…
Remix of the Grease_194529 model https://www.printables.com/fr/model/100519-grid-box-containerplanter, you can attach a 60mm fan to it. This mod saved me more than 10° on the temperature of the cooling fluid To attach a 120mm fan, I…
Print both part and remove red marked part after printing!
Fits a PVC tube with 8mm outer diameter. Made to replace the spring on the flipsky 75200 vesc, for a tighter tube radius.
The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508
This is a remix for the BLV mgn Cube. Some Parts of the X-Carriage are changed to mount a chimera+ watercooled version. You have to reprint the Rear Plate, the Front Plate, the Bottom and the Twin Blower Shield. Everything is kept quiet…
Watercool Mora Link Mounting Bracket & PCI-E Support for use with Formd T1
I bought an used machine that didn't have the original with it so I had to improvise one. Needs 1,7mm thick 8mm diameter circular magnets in the back if you want to attach it securely. And steel strip on the cooler's shell to attach it…
Just a wrench for the hex plastic nuts inside the water tank.
Remixxed SB fto mount the watercooled cyclops hotend. Ofsets x: 4mm y: 3mm Not fully tested yet. More info follows soon,… Hardware other then regular verion 1x 25 mm m3 1x 30mm m3 2 x 8mm m3 Countersunk
Water cooling block for the Asrock RX 570 8G video card. You need a few more screws, soft silicone cord for sealing, and the usual fittings. The heat sinks are copper plates, there is a special plate under the GPU (from a cheap water…
Watercooling manifold to mount on DIN rail you need this two things https://de.aliexpress.com/item/1005004807850181.html?spm=a2g0o.order_list.order_list_main.285.68035c5fdkXKsP&gatewayAdapt=glo2deu…
This holds a Reservoir straight for mounting it on a radiator
This is possibly the smallest PC Testbench with dual 360mm Radiator Support. It has mounting for ATX motherboards and therefore also ITX. mATX can be mounted as well but is not supported on the bottom two screw holes. eATX should also…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
Allows flexibility on where the reservoir is vertically installed. The bracket can be mounted onto a 120 mm spacing fan or radiator. Print with supports for the large overhang.
Set of different hose clamps for closed circuit water cooling Universal for hoses of 10/11 mm, see schematics in pictures. 6 different Heights: 12 mm, 15mm, 20mm, 25mm, 30 mm, 35mm 5 different Lengtes (Center-to-center): 25mm, 30mm, 35mm,…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
![Peltier Cooler Watercooling Mod [GUZZANTI GZ 24DD] - More efficient and powerful cooling system](https://media.printables.com/media/prints/200580/images/1847651_a2bb5d41-67ba-47b2-84b0-0bd2716e485a/img-4872.jpg)
