Ratrig "Stock +" V-core 4 CNC toolhead for watercooled goliath hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on an as close to stock watercooled goliath implementation for the Ratrig V-core 4 toolhead.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 866
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All parts are made from 7075 aluminum, except for the fanduct, which is 3D printed in aluminum.
The cost for one full set is around $250, excluding shipping and taxes.
All threaded holes are M3 and tapped using a blind hole tap. It's highly recommended to use a mild loctite (blue) so you don't strip out the threads. For heated enclosures like mine it's mandatory unless you like to tighten everything every 100 hours.
Make sure to pre-drill the 3D printed duct before tapping. I polished some areas for a cleaner look, but that’s optional.
The belt clamp parts need a slight chamfer. I used a deburring tool, but you can also model this directly in CAD.
The input shaper results are for a 400mm hybrid.
For commercial quotes: [email protected]
If you like the design, feel free to support me by buying a beer: https://www.paypal.com/paypalme/ognoizieworks
You can see the finished project in this video: