Ratrig "Stock +" V-core 4 CNC toolhead for watercooled goliath hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on an as close to stock watercooled goliath implementation for the Ratrig V-core 4 toolhead.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 85
- Makes
- 0
- Views
- 866
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
All parts are made from 7075 aluminum, except for the fanduct, which is 3D printed in aluminum.
The cost for one full set is around $250, excluding shipping and taxes.
All threaded holes are M3 and tapped using a blind hole tap. It's highly recommended to use a mild loctite (blue) so you don't strip out the threads. For heated enclosures like mine it's mandatory unless you like to tighten everything every 100 hours.
Make sure to pre-drill the 3D printed duct before tapping. I polished some areas for a cleaner look, but that’s optional.
The belt clamp parts need a slight chamfer. I used a deburring tool, but you can also model this directly in CAD.
The input shaper results are for a 400mm hybrid.
For commercial quotes: [email protected]
If you like the design, feel free to support me by buying a beer: https://www.paypal.com/paypalme/ognoizieworks
You can see the finished project in this video: