Watercool Mo-Ra3 420 stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printed stand for the Mo-Ra3 420 radiator for watercooled PCs.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 1184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a printed stand for the Mo-Ra3 420 radiator for watercooled PCs. It might also fit other Mo-Ra generations or sizes. I haven't checked them.
It's inspired by the original POM stand from Watercool.
For mounting you need 4x M3 screws with a length of about 8-10mm to mount them properly.
I wouldn't go lower than 40% infill because of stability. Remember that the overall unit has quite some weight when it's filled completely.
Used 0.1mm layers to have a finer side surface. After all it doesn't matter tbh. :D
Supports can be easily pushed out from the top with the screws you need for mounting the stands to the Mo-Ra.