1 / 6
Tesla Model Y Trash Bin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small discreet trash bin to fit into the cubby between the front seats, behind the center console.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 331
- Wydruki
- 3
- Wyświetlenia
- 2731
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 16)Remiksy (0)Kolekcje (105)Powiązane
This is a small trash bin designed to fit discreetly into the cubby between the two front seats behind the center console. It's the little cubby area below the rear vents, on the floor, in front of the back row. It can easily be accessed from the front seats to throw away trash.
- It's designed with a quick access opening to quickly slot in small items such as parking/shopping receipts.
- It also has a flip up lid with a easy access tabs on either side to open for throwing in larger items.
- Its base is designed to accommodate floor liners that has curved edge-lips that are 20mm deep and 25mm height.(See base of bin in photos for visualization of what I'm referring to.)
- The bin has a snug fit into the space, but it also has two 20mm wide retainers at the back of the lip to accept velcro strips or other attachment method for securing to the car.
Important printing notes:
- All pieces should be able to fit onto the Bambu X1C, P1S, A1 build plate. (or bigger build plate area)
- The Lip and Lid pieces are designed to be printed upside down with SNUG NORMAL support to ensure it fits within the build plate printing area.
- The Lip piece should be printed with a 5mm OUTER BRIM to ensure it has enough contact to the build plate.