1 / 2
Elecraft AX1 storage card with "anti-pain" clips
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slight modification to round off a few sharp edges on the clips of the AX1 storage card.
- Ocena
- 4,8 / 5
- Polubienia
- 15
- Pobrania
- 113
- Wydruki
- 5
- Wyświetlenia
- 451
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (27)Powiązane
I printed the AX-1 storage card in PETG, 50% infill, 5 walls, 0.2 mm layer height. Both .step and .stl files are attached for whatever format you prefer.
