BetaFPV Air 65mm Whoop Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple travel case for the Betafpv Air65 whoop, or most other 65mm tiny whoop. Uses the foam from the original package
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 1037
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this simple case to hold my BetaFPV Air65 Tinywhoop. It uses the foam cutout and sheets that come in the original packaging. They hold the whoop snugly, and this setup has been in and out of my backpack getting tossed around for a while with no damage.
I printed it with fuzzy skin enabled in PrusaSlicer and used the paint on fuzzy skin smart fill setting to add it to just the outside of the case, and not the area where the two halves slip over each other. I set the thickness and distance settings to 0.1mm because I have found that matches the finish left by a textured PEI plate for a nice uniform look.
Please post your makes and remixes, I love to see what creative modifications people make to my designs!