GPS Front Relocation - iFlight Nazgul v5 Evoque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moves the GPS from the back to the front to reduce RF interference
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This module places the GPS under the front camera mount.
This fits the original GPS as well as any similar sized GPS modules.
NOTE: GPS modules all have different pin outs! You will likely need to change the pin order if you use a different GPS!
Required:
- 4x M3 screws (16 to 18 mm long)
No cable extensions are needed. You can reroute the existing cable GPS cable forward.
I cut out a notch under where the cable gap is in the model; photo attached.
Although the GPS is under the camera, it works fine. I've tested this with a full GoPro 10 and average over 14 sats while flying.
- TPU
- 10% infill
- Shown with 0.2 layers, but any should work