1 / 4
GPS Front Relocation - iFlight Nazgul v5 Evoque
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moves the GPS from the back to the front to reduce RF interference
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This module places the GPS under the front camera mount.
This fits the original GPS as well as any similar sized GPS modules.
NOTE: GPS modules all have different pin outs! You will likely need to change the pin order if you use a different GPS!
Required:
- 4x M3 screws (16 to 18 mm long)
No cable extensions are needed. You can reroute the existing cable GPS cable forward.
I cut out a notch under where the cable gap is in the model; photo attached.
Although the GPS is under the camera, it works fine. I've tested this with a full GoPro 10 and average over 14 sats while flying.
- TPU
- 10% infill
- Shown with 0.2 layers, but any should work