Shoe Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side parts for a simple shoe rack. Connected with 10mm square tube.
- Ocena
- 0 / 5
- Polubienia
- 130
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 4537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Side parts for a simple shoe rack.
Before you print this model, consider printing my new and improved version of this shoe rack!
You need 10mm square tube with a wall thickness of 1mm. Also 8 screws to fix the aluminum profile.
Deburr the aluminum profile inside and outside after sawing. Drill holes at the ends through which the screws can later be screwed into the plastic.
After attaching the aluminum profiles, it is advisable to also drill into the plastic with a smaller diameter so that the screws do not break the plastic inside.
If you like check out my other designs too!