1 / 7
Samsung SB-L110 A Dummy USB-C battery for samsung Handycam — zdjęcie 1
1 / 7

Samsung SB-L110 A Dummy USB-C battery for samsung Handycam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

yeah, new batteries were expensive. Better spend a whole afternoon to design one

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

as an analog boy i always wanted to try analog video so here we are
i had my parent's handycam from 2003 (older than me haha) and i had a 8mm tape but the battery was dead

a battery like this costs like 30 euros online

this one cost me like 3 euros and here is the BOM:

total of 3,07 euros

i set the trigger module at 12v and the buck converter at exactly 7,4V as the original battery

i used some tin foil to make the two contacts (keep in mind the + and - symbols)

the switch is for added safety and it's wired in line between the trigger and the buck cinverter, the dummy doesn't wiggle in place and it locks in perfectly

print without supports, any material and layer height, 0,4 or 0,6 nozzle

assembled averything with CA Glue and hope

 

!! i'm not responsible for any damage at you devices !! 

avoid overvoltage to prevent damage

the wiring is pretty simple, + with +, - with -, in and then out, figure it out youself :)

 

Tagi