Samsung SB-L110 A Dummy USB-C battery for samsung Handycam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
yeah, new batteries were expensive. Better spend a whole afternoon to design one
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
as an analog boy i always wanted to try analog video so here we are
i had my parent's handycam from 2003 (older than me haha) and i had a 8mm tape but the battery was dead
a battery like this costs like 30 euros online
this one cost me like 3 euros and here is the BOM:
- step down DC-DC buck converter at 1,6 euros each
- mini switch 3A at 0,27 euros each
- usb-c trigger module at 1 euro each
- 15g print at 20 cents
total of 3,07 euros



i set the trigger module at 12v and the buck converter at exactly 7,4V as the original battery
i used some tin foil to make the two contacts (keep in mind the + and - symbols)
the switch is for added safety and it's wired in line between the trigger and the buck cinverter, the dummy doesn't wiggle in place and it locks in perfectly
print without supports, any material and layer height, 0,4 or 0,6 nozzle
assembled averything with CA Glue and hope
!! i'm not responsible for any damage at you devices !!
avoid overvoltage to prevent damage
the wiring is pretty simple, + with +, - with -, in and then out, figure it out youself :)