SAB Servo Horn Alignment Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clip-on tool to simplify servo alignments with SAB servo horns (e.g. SABHA050-S) in-place, great for RotorFlight.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tool simplifies the in-place alignment of the servo horns (Brand: SAB) used, for example, on SAB Helicopters (Goblin, Kraken, Genesis, etc.). When used in connection with a small bubble level (e.g. 10x10x29 from amazon https://www.amazon.com/gp/product/B07VTQG17V/) glued to the horizontal edge, one can trim each servo horn to achieve perfect geometry.
When glued to the 45 degree edge, it can also be used to set the servo scale in RotorFlight (aka 45 degree calibration).
Print Instructions
- For best visibility, two colors are recommended. Select a different color for the bottom and top line. A separate .3mf file is provided for single-color prints.
- optimized for 0.2mm layer height with a 0.4mm nozzle.
- Arachne wall generator (in Orca Slicer) recommended to ensure the thin line is printed correctly.
- Orient such that the 45 degree overhang is at the top. No supports required.
- The design is fairly robust against printer imprecision. If the fit is too loose, try scaling everything down to 99.5% or less.
- I used PLA with 2 walls, 10% cubic infill, but it doesn't really matter because this is not a high-load part.