1 / 3
Mount for Urvolax UR73C Carplay screen for VW Up, Skoda Citigo, Seat Mii — zdjęcie 1
1 / 3

Mount for Urvolax UR73C Carplay screen for VW Up, Skoda Citigo, Seat Mii

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount to attach Urvolax carplay screen to factory Maps&More mount in VW Up and siblings.

Ocena
0 / 5
Polubienia
9
Pobrania
114
Wydruki
0
Wyświetlenia
2451
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted instead of glueing.

 

Screen used: https://www.amazon.nl/-/en/dp/B0CXCR1QN5

 

Printed in black PETG (extrudr XPETG MATT) with 0.15mm layer height. Printed with support from build plate.

 

Attach to the Maps&More mount by removing the original screws inside the base and replacing them with M4x25 bolts. You can choose to remove the original cabling for the Maps&More unit, which will allow you to route the cables for the Urvolax screen through the dashboard. Check this link for some information on how to do this.

Attach to the Urvolax screen by removing the swiveling base and reusing the four mounting screws and central bolt.

Tagi