Liczymy pasujące modele…
You need to unscrew the two Torx from the original Base and replace them with 25mm M4 (DIN 912 fits perfectly for my model). Bonus: if you delete the electronics from the base you can put the cables for the unit through the base and my…
CD Mount for 10.26" Carplay external screens that can be found on Aliexpress/Amazon. The one im using is from Aliexpress OBDPEAK T20. It uses the 4 clips mounting system. This remix version has the following feature from the original.…
I picked up one of these cheap wireless Android Auto/Apple CarPlay displays from Amazon (specifically the 9.26" one from VSTARK which was going for about $189 before coupon at the time of this writing). Rather than plopping it on top of…
I downloaded tj4sheelee's base idea for a CarPlay mount, and while it did fit my screen perfectly, I still needed a way to mount it in my car. So, I made this other model that achieves just that: it mounts the screen in the car's CD slot,…
screen can be bought here: https://getcartablet.com/products/pro-max-1 cheaper here, but not sure if its the exact same model: https://nl.aliexpress.com/item/1005006744171534.html how to remove the airco grill: (stick the butter knife…
This is a replacement CD mount for one of those external Carplay/Android Auto screens from amazon/ebay/ali express etc. The mount it came with wasn't really a good for for my car, so I decided to make a CD player mount instead.
A CD Slot mount for aftermarket Android Auto/Apple Carplay infotainment units found on Amazon, Aliexpress, etc. The brand I have is Volam, but many other units use the same mounting system. The existing models for a CD slot mount that I…
A blank connector/mounting plate that fits aftermarket infotainment displays. The brand I have is Volam but many carplay/android auto displays use the same mount system. I modeled this for a CD Slot mount , and figured this could save…
This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it in the lower position or an AMPS bolt pattern RAM Ball with a Garmin GPS or a Motorcycle…
It's just a mount, which sits on top of the four screw-threads on the backside of the Aoocci C6Pro.
I made this mount for my old ‘97 Toyota Tercel because I didn’t like the original mount that came with the Carkool CarPlay/AndroidAuto screen. It’s made specifically with both that display and my car in mind, so it might not work on your…
A simple CD slot mount for an aftermarket external CarPlay display touch screen. I'm using this one from Amazon: https://www.amazon.com/dp/B098DRVKRW But you can find very similar ones on AliExpress for around $150. They almost all look…
Mounting piece for 7" myAI CJ-PTC208 Carplay/Android Auto screen. Use it as a starting point for further creation. I used it with 🚗 Replacement cd inserts for phone holders .
I made this so you can allow the unit to have suffiecient heat dissaptation while mounted via 3M velcro in your car. Suitable for GarlinKit Tbox Ambient AI Box. Print in PETG or ABS/ASA. PLA will melt on a hot day and might damage the…
This mount was designed for the Westods Portable Wireless CarPlay and Android Auto unit. This will likely fit other of the 9.3" wireless head units on Amazon that are rebranded under other names. The mount is extremely solid and doesn't…
A very solid mount to go over the original display in the Rivian R1T and R1S, gen 1. I don't know if this works on gen 2 vehicles nor the R2, but would love to hear if someone tries it. It can go in the middle, or towards either end, and…
**Update ** - Added a shorter part 1 This is version two of my previuos model. Same as the original, it’s made with both my specific Carplay/AndroidAuto display and my specific car (1997 Toyota Tercel) in mind, so it might not work on…
On AliExpress and other places you can find a waterproof 5 inch touch screen with wireless CarPlay for motorcycles - this thing here . This is my mount for the navigation bar of my Aprilia Tuareg 660. Two pieces: One gets screwed to the…
The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted…
L300 CarPlay unit made for Honda cb1000r printed in PETG The model use the OE screws and rubbermounts The model i made to make a slick mount that look almost OE and is as minimal as possible 4x 5mm nuts 4x 5x30mm bolts the carplay unit i…
A simple mount for a common 10.26" DVR / touch screen dash cam and CarPlay unitA simple mount for a common 10.26" DVR / touch screen dash cam and CarPlay unit. Note: You'll also need a CD bay insert it can mount to,…
Modified existing Carplay holder model from https://www.thingiverse.com/thing:4777828 to fit the OTTOCAST square adapter (https://www.amazon.com/OTTOCAST-Wireless-CarPlay-Adapter-U2-AIR/dp/B09Q65SX47/?th=1) also eliminated one side to…
In unserem C5 AirCross gab es nur eine Ablage für das Mobiltelefon. Jetzt habe ich dafür eine Halterung konstruiert, die man per USB Kabel mit dem Auto verbinden kann. Somit sind die Ladung und die CarPlay Funktion möglich. Das Telefon…
If you Want a CarPlay/Android Auto display in your R1 (Google/Apple Maps, Apple Music, etc.) Like an idea by EV Sportline ( https://shorturl.at/DMhCr ) Already have a CarPlay unit (as I do) or don't understand why to pay $259.95 (as I do)…
The details to how make yourself a Carplay Navigation for your BMW Motorcycle can be seen in the video
Ich habe für mein Auto dieses iPhone Halter entworfen um ein Problem zu lösen. Ich habe Kabelgebundenes CarPlay und bekanntlich ist das Laden über CarPlay USB nicht so toll, außerdem habe ich keinen richtigen Platz im Auto für die…
This model is basically a clone of "81A035736" and it allows you to have Carplay and android auto while saving €200+ by adapting a €35 usb port from the Volkswagen Golf 7 ( 5Q0 035 726 E ) to your Audi A3 8V (2012-2020) Just take the the…
This mount has recessed holes in the bottom so that it fits snugly onto the body of the Android Auto unit and slotted holes to account for any deviations in the mount or device. I've had good success printing them with .15 layer height…
BOM 4x M3x16 4x M3 Washer
This is a custom dashboard mount for the ALPINETECH 11.5” CarPlay Display ( Amazon link ) designed specifically for the VW Sharan 7N (2010–2022) . It allows you to mount the display securely without any screws or adhesive — simply clip it…
This solves an annoyance with wired Apple Carplay/android auto allowing you to just drop your phone in the dock to easily connect and disconnect. to use this you will need a usb cable with a 90 degree end, the bottom of the mount has the…
Screen mount, this slides inside the CD drive and holds a Carplay Screen, I used the CAMECHO 7" Carplay screen
This is a mounting solution for using a Carpuride W702s CarPlay / Android auto screen in Triumph cars that use the same ashtray size. This is currently confirmed as TR5, TR6 and Spitfires (as the original model was developed for the…
Volvo V50 / S40 / C30 / C70 CarPlay Fascia Mount Remix Remix of the DS Prints Custom Volvo V50 / S40 / C30 / C70 phone mount design, modified to remove the phone mounting section and replace it with an angled mount for a low-cost CarPlay…
This is specifically for an iPhone 15 Pro with a Peak Design Everyday Case, and a random USB-C cable I found. For your device/USB-C cable, you will likely need to measure with calipers and make some modifications. I used command strips to…
Slide in car mount so you can easily use your iPhone 11 Pro Max with the Apple Leather Case with Apple CarPlay. This is printed in PLA but I will be reprinting it in PETG so that it doesn't melt in the summer. Still a work in progress, I…
This is a bracket i made for a 22mm handlebar, specially for the Chinese CarPlay/Android Auto units. The come with a long arm which vibrates a lot. This bracket/mount mounts to a 22mm handlebar and the navigation unit, i made the hole in…
When you attach your phone in CarPlay mode you can't use it however you still don't want it rattling around in your console pockets. This case will friction-fit an OEM iPhone lightning cable and secure your phone in an easy-to-remove…
Citroen C2 Screen Holder for CarPlay and Android Auto Custom-designed screen holder for the Citroen C2, perfect for mounting a display compatible with CarPlay and Android Auto. Its optimized design ensures a secure installation on the…
you need 4 pieces of 2.5mm inserts and 4 screws 2.5x8mm recomended petg, abs or asa
Please read full description from original.
This is an adapter for a common, inexpensive head unit to allow it to be installed in the single DIN slot on your Honda ACTY, using the original stereo mount points for a secure fit. Recommended to be printing in PETG, ABS or ASA. You'll…
Hi I bought a chinese cheap Din2 car audio for my old lady, my need was a radio frame, i believe that this design can fit to others carplayer 7 inch with the same chassis, please have a look of pictures whre this is the side of the…
OLD port AMI New adapter 5Q0035726E -…
Super-shallow Android double-DIN car stereo can't use factory Toyota mounting brackets to install in 2002 Solara - they are positioned too far back on the original factory radio to attach to the new one. This is a set of left and right…
To print use PETG, no supports are required. You will also need 3 threaded inserts M5 x 9.5 by CNCKitchen. If you have bigger screen or want to use the high position on small screen, then I would recommend something like…
Support Ecran Carpuride (ou autre). Diamètre de la sphère = 23mm. Diamètre pour fixation sur un tube de 23,8mm
The CD tray in my car was too large for the existing design, so I added a rounded lip that slots in between the trim and head unit Modelled for and used in a Mazda CX-5 KE Grand Touring, likely compatible with any Mazda of the same era…
I had a Husqvarna Norden 901, a Vanasche GPS mount[1] and a Maxca C5 Pro CarPlay/Android Auto display and wanted to mount them all together. The display and mount are both AMPS-compatible, but the display's mounting bracket only allows…
ODBPEAK CarPlay Holder for Hyundai i30 (CD Slot Mount) Description: This is a custom-designed holder for the ODBPEAK CarPlay screen, made specifically for the Hyundai i30 . The i30 dashboard offers very limited mounting options, so this…
Um die Kabel eines günstigen Apple Carplay/Android Auto-Nachrüstadapters sauber aus der Mittelkonsole zu führen, habe ich eine neue Blende als Ersatz zum Halter der Mobiltelefon-Aufnahmeschale erstellt. Das Logo wurded im Prusa-Slicer als…
Montage décrit sur https://www.forumvelsatis.fr/phpBB3/viewtopic.php?f=5&t=14863
This model was designed as a “drop in” phone mount when using carplay/android auto. When slotted into the mount, the phone will plug directly into the routed USB C cable. The cable path allows the phone to be disconnected by pulling the…
An adapter to secure a cheap ball-mount Carplay/Android Auto display to the original Škoda Citigo mobile phone holder mount. Clips on the same way as the original. Thank you, Peter, for the mounting teeth design! I used this display:…
Ford Ka Universal CarPlay / Android Auto 7” Screen Mount Bracket – 3D Printable STL File Custom designed 3D printable bracket to mount a universal 7” portable CarPlay / Android Auto screen in a Ford Ka. Designed to give a clean, secure…
As I was upgrading my original screen to the 10,25" Android Screen with Carplay, I recognized that you couldn't use the the originial pins for the plastic cover, as you needed to break the silver cover from the black backpart, that has…
Halterung zum montieren im Fahrzeug, zum Einschub und rausziehen. ohne jedesmal Kabel in die Hand zu nehmen. Passed -→ Original Apple USB C auf Lightning, wird durchgeschoben und mit einen einen kleinen Schrauben befestigt. An der…
Jensen JC7DM There is a version specific to the Jensen JC7DM. It attaches to the slide mount that comes with the unit. This version prints nicely without supports. Generic I made the other version for my dad to use a suction cup mount.…
This model allows you to mount a self-contained Carplay/Android Auto unit to the top of the Miata tombstone. This model is still a work in progress, but I am using it in my 1994 NA Miata. I used M4 by 6mm bolts and M4 heat inserts (with a…
This is a custom mounting adapter for the LAMTTO 9.26" Wireless CarPlay and Android Auto Portable Touchscreen . It serves as a replacement for the stock mounts included with the LAMTTO kit and is designed to reuse the existing mounting…
just print it in PLA, PETG or ASA, it is a easy printable model without special. Have fun! You can use 2 screws M3 HEX to fix the plug inside. The Heads of the screw are unvisible.
Holds carplay adator from Quadlock. Needs to add double sided tape to mount Print Settings Printer Brand: Prusa Printer: i3 MK4 **Rafts:** No Supports: No Category: Automotive
A Quick solution to mount the X6 Motorcycle CarPlay Unit on the 12mm rod on my Tuareg 660. Be aware, the hole for the rod is not exactkly in the middle of the printed bracket, so check, that booth are oriented in the same direction.
Jensite Carplay screen mount for KTM SuperDuke 1290 GT gen 1(2016-2018) for the navigation mount. I have the "7 version, I think the other sized have the same mount on the rear. Link to Jensite screen(no referral):…
I wanted to design a mount that I could use in my 2014 RAM 1500 Big Horn. This uses the existing mounting holes on top of the dash where I would normally keep my sunglasses at. It does get direct sunlight and hot in vehicles, so I would…
Introduction: A friend of mine bought a CarPlay unit for his KTM 1290 Super Adventure X , but struggled with the usual bulky mounts that stick out too far anbd blocks most of the dash.So, this design was born - a clean, compact…
Print in PETG and use a super glue to mount it to the display.
I bought an Android carplay adapter for my car, and the stock case was suffocating the module and overheating it which causes it to disconnect and reconnect during long drives. So I teared it apart and designed a new case for it with some…
è un adattatore per potere usare più di un dispositivo gps sulla propria moto. Da stampare in PETG o meglio ancora in ABS
The multimedia system on my motorcycle (a 2022 Honda NT1100) supports CarPlay or Android Auto, so I purchased an inexpensive module from AliExpress with this functionality. Since the module cannot withstand harsh weather conditions, I…
printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).
This mount is designed for the 14mm rally bar on the 2026 Kawasaki 500 because the original Accooi mount is far too big. The design leaves enough clearance for protective tape around the bar to prevent damage. Print this model without…
This kit is used to convert a Navi-equipped 2nd-gen Acura TL to use an Android Auto or similar touchscreen navigation stereo. Primarily, this relocates the manual HVAC controls to the original stereo location. Build thread is available…
From the original version, I lifted and tilted forward the main mount to work on the dash of the Element. After trying it out, there was a little slop from side to side, so I added a couple of tabs that touch the back of the unit near the…
Having looked into aftermarket Apple CarPlay stereos, it seems like my car's centre console doesn't have drop-in replacements because of how they designed the integration between the climate controls and satellite navigation option. Any…
Quando si cambia moto ma si vuole tenere lo strumento di navigazione che già si utilizzava. Ho stampato i pezzi in ABS perchè la moto è soggetta a sbalzi climatici improvvisi, probabilmente può bastare anche il PTEG
Raises the CarPlay unit up so the front dashcam can see above the dash. It was built for the unit I bought off of AliExpress: 10.26"4K 64G TouchScreen Portable Wireless CarPlay Android Auto Truck Dash Car Stereo Bluetooth GPS Navi…
Cut model in half for easier printing.
Ich habe einen Halter für den Carplay Adapter in meinem Golf 4 erstellt. Im Slicer muss er um 90° gedreht werden damit die drucklinie nicht mit der Biegelinie übereinstimmt.
Un piccolo supporto per il carplay di Wonsidary da utilizzare con il supporto di evotech stampato in ABS per le intemperie
The multimedia system on my motorcycle (a 2022 Honda NT1100) supports CarPlay or Android Auto, so I purchased an inexpensive module from AliExpress with this functionality. Since the module cannot withstand harsh weather conditions, I…
Montage décrit sur https://www.forumvelsatis.fr/phpBB3/viewtopic.php?f=5&t=14863
screen can be bought here: https://getcartablet.com/products/pro-max-1 cheaper here, but not sure if its the exact same model: https://nl.aliexpress.com/item/1005006744171534.html how to remove the airco grill: (stick the butter knife…
è un adattatore per potere usare più di un dispositivo gps sulla propria moto. Da stampare in PETG o meglio ancora in ABS
printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).
Ford Ka Universal CarPlay / Android Auto 7” Screen Mount Bracket – 3D Printable STL File Custom designed 3D printable bracket to mount a universal 7” portable CarPlay / Android Auto screen in a Ford Ka. Designed to give a clean, secure…
This is a custom-designed replacement mounting plate that allows you to attach the EKIY 6.5" wireless CarPlay / Android Auto screen to a specific motorcycle GPS bracket . ⚠ Important: This model is compatible only with the exact products…
I found it annoying plugging my phone in every time I got in the car, so I made this. The bottom could use a little work, as the attachment isn’t perfect. I would redesign it, but sadly I only have the one car and don’t need to reprint.…
