Toyota Solara Radio Mounting Brackets for Android CarPlay Stereo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to mount a super-shallow Meteeser 7" double-DIN Android CarPlay deck in a 2002 Toyota Solara with JBL system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Super-shallow Android double-DIN car stereo can't use factory Toyota mounting brackets to install in 2002 Solara - they are positioned too far back on the original factory radio to attach to the new one.
This is a set of left and right mounting brackets that mount to the sides of a Meteeser Android radio from Amazon and drop into the factory Toyota radio opening. There is no modification required to the car whatsoever. I did have to slightly clearance the Android radio trim ring where the mounting brackets go over top of it so they lay flat properly and don't spread too far apart. This isn't seen at all once the factory dash piece of the Solara is installed. Install looks great, like it came from the factory.
I printed in black PLA with 50% gyroid infill and 0.20mm layer thickness on a Prusa MK3S with a 0.4mm nozzle. You could go even higher on infill if you don't mind the longer print times.
AutoCAD .dwg file also included in the event you want to remix the brackets for a different purpose. They may work in other applications, I would think for the Camry at a minimum.