Bracket for Chinese CarPlay/Android Auto
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made bracket for the Chinese CarPlay/Android Auto units, as the arm that comes with it is to long and vibrates a lot.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a bracket i made for a 22mm handlebar, specially for the Chinese CarPlay/Android Auto units. The come with a long arm which vibrates a lot. This bracket/mount mounts to a 22mm handlebar and the navigation unit, i made the hole in a way that when you remove the ball mount of the unit, it slots in the bracket and you can use the same screw to fasten it.
The other 4 holes need a M4 screw and nut (30mm long preferred)
(DESIGN HAS BEEN CHANGED AFTER PHOTO'S, THE POINT WHERE THE NUTS GO HAS BEEN MADE STRONGER)
Try it out yourself!