Bracket for Chinese CarPlay/Android Auto
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made bracket for the Chinese CarPlay/Android Auto units, as the arm that comes with it is to long and vibrates a lot.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This is a bracket i made for a 22mm handlebar, specially for the Chinese CarPlay/Android Auto units. The come with a long arm which vibrates a lot. This bracket/mount mounts to a 22mm handlebar and the navigation unit, i made the hole in a way that when you remove the ball mount of the unit, it slots in the bracket and you can use the same screw to fasten it.
The other 4 holes need a M4 screw and nut (30mm long preferred)
(DESIGN HAS BEEN CHANGED AFTER PHOTO'S, THE POINT WHERE THE NUTS GO HAS BEEN MADE STRONGER)
Try it out yourself!