Counting matching models…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Ist eine Schelle mit 22mm, die mit einem Kabel Binder befestigt wird. Und hat eine Halterung um noch was fest zu machen.
I'm a big fan of the filament swatches in slide format https://www.printables.com/model/269408-filament-swatches-that-fit-in-a-slide-tray-or-caro There are lots of different boxes for this (at least here in Germany) and also very nice…
Its designed for a tube from Aquael that has 22mm diameter. Tolerance is 0,5mm to fit well
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl Key Features: -Non-slipping 16mm clamps with TPU inlay -Rotatable in three…
I used the Voron V0.2 Master Assembly Fusion 360 model and added a 22.15mm hole to the rear skirt so that I could add a switch for my LEDs.
GeoCaching 700: Hook zu Uni400 - Ø22mm - M6-Mount - Ø22 - M6-Mount Benötigt: 2x M6 - 4kt-Mutter - DIN 557 ( SW10 - 0.8D ) 4 Modelle: 746 - Hook - Öffnung 40mm - Haken Höhe 60mm 747 - Hook - Öffnung 40mm - Haken Höhe 60mm - mit Bohrungen…
Tool for removing the Bar End Insert from Triumph handlebars (28.6 / 22 mm). You only need an M6 bolt (minimum 40 mm long) and an M6 flange nut. If you print the tool from a more durable material, a washer will not be necessary. I printed…
If you haven’t bought the stem mount, I designed a handlebar mount that fits the 22 mm diameter bar section where the original controller was mounted. The mount is fixed to the bar using two zip ties . I recommend adding a small piece of…
The Garmin DriveSmart 86 has a 22mm ball joint instead of the other model's 17mm, so this converter lets the GPS be used with the standard mounting equipment. For printing, I used: 6 Perimeters 100% infill .20 layer height I have tested…
This is a modified version of the excellent print-in-place broom holder by fns720. In this remix I removed the side screw holes and added them on the top , allowing the holder to be hung as close as possible to a corner . Toto je upravená…
Printed on a P2S using PETG CF because this is what I had on hand. Settings I used for the print: Wall count - 3 Infill - 15% Gyroid 0.2mm Standard quality preset Both the wall count and the Infill percentage can be increased if needed.
The Kohler GP51487 tank gasket kit comes with bare nuts that retain the tank to the toilet base. Previously, my toilet had plastic nuts that were 1" in diameter. This makes tightening the screws much easier, retains the original outer…
Just caps for the fidget spinner that I have uploaded.
Simple Sleeve to grip the tapered shaft of a soldering iron Absolutely not a sponsored post
A few weeks ago, I sprained my ankle quite badly and needed crutches for a few days. I remembered that I had an old pair somewhere and great news, they're still in great shape... except for the tips/feet. They were so hardened that they…
A simple mount for the runleader or similar Tachometer to fit 7/8 or 22mm Handlebars. Required: 4 x M3 x 10mm bolts 2 x M3 washers 4 x M3 Voron heated inserts
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Connector with 22x1 mm thread for electrical junction boxes
I designed this some years ago in blender, looking forward to redesign it in freecad and make it fully paramteric - sorry this old version isnt. This version also has a special nib for the kind of wristbands I use. This will be removed or…
Add a 22mm hole to the right front skirt of your Ender 3 NG's Flat Mesh Skirt to mount a push button. Tip: take a look at this model for inspiration on how to wire up a power / shutdown button!
Cable gland for clamping cables entering control box etc. Firstly, you're far better of buying this part, but in a pinch this will get the job done. The body is sized at 22mm as that fit my needs, inserts cater for various number of…
I normally model lower than the complete height to make retrieval of contents easier. Adjust as desired Will hold around 200 sheets of normal paper I like to hide my seams in the back or in the interior seam Other sizes easily made in the…
This model is compatible with the lego system.
Replacement for broken peg for solar torch, upper side fits 22mm diameter pipe. Printed in PETG.
This is a case for a cheap, thin 433Mhz remote control duplicator that can be found in pages like AliExpress (see the attached picture if the link doesn't work). To install, follow these instructions: Insert the button from the inside of…
print surface which has contact to floor down, no support needed Highly suggest doing a test print and maybe adjusting the scaling depending on how you need your fit. Designed for friction fit (hammer in)
A simple replacement free loop for the Garmin Forerunner 935 or any other Garmin with a 22mm band. Made in Fusion360, it is intended to be as true to the original as possible. Printing Instructions Print on its side for best results.…
M-30 HOWITZER: SOVIET 122MM M-30 FIELD HOWITZER model. Scale approx. 1:18. Original Designer Assembly Instructions: To secure the wheels to the axle, use 2 screws 3x16mm (diameter and length without head), with washers with a diameter of…
Howitzer Original Designer Assembly Instructions: To secure the wheels to the axle, use 2 screws 3x16mm (diameter and length without head), with washers with a diameter of 7mm. Use 2 3x30 screws with two nuts and four 7mm washers to…
I have included the obj files if anybody wants to adjust it for there own needs. as this is my first remix it was made in tinkercad (still need to learn fusion 360) it is simple but functional. I printed it with the same settings I used…
This is so you can connect two 22mm ("normal") CPAP hoses in case you need to extend them for some reason.
About This is a label carrier/holder for devices that are mounted in ø22mm holes. This includes buttons, switches, pilot lights, and other indicators. Such devices are usually found in the front cover of a control panel. This carrier is…
It has to be shallow to avoid vignetting my wide angle lens (the official lens hood EW-60E has similar dimensions). I printed it facing up with normal supports.
Durable and comfortable sports watchband designed to fit the standard 22mm mounting size. I needed a sports watchband for my Samsung galaxy smartwatch since the original leather band was not suitable for swimming and other water or sweat…
Replace ball bearings that spin too easily with these print-in-place friction bearings. Can oil/grease them if the plastic tolerates it. I printed in ASA at 0.2 mm layer height. Provided here are three gap tolerances depending on how…
I designed this stand for the iMac 27" which raises the Mac by 22mm for a more ergonomical screen position. This may also work for other iMac models. Features: The open space can be used for an external hard drive with cable access. Front…
This earring stand prints with a telescoping tower that is extends to 72.5 mm (overall height is 85mm extended) and collapses to 22 mm. Attach the interchangeable earring top (or something of your own design) to the 3.0 mm x 3.0 mm square…
Print on its side with supports I have been printing with 45% fill for strength
Easy to print finder eyecup with built in 22mm thread for Nikon DK-17M or Tenpa 1.22x/1.33x Magnifying eyepiece. It is also compatible with 22mm thread of KPS and SMDV 1.35x Magnifiers. I'm using 1.22x Tenpa magnifier on Nikon ZF to…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Clothes hanger for school locker tube. Hole diameter 22mm. PETG print.
I have a Voron Trident and wanted to add CPAP to my Stealthburner with KNOMI 2. I am using the most recent Stealthburner + KNOMI face with CPAP that BTT released. I had some 22mm hose laying around and wanted to use it but everything is…
Clamp originally made for securing 22mm 10/3C Teck Cable. It can of course, be used for any 22mm diameter item.
Slim mount for Garmin Zumo XT and XT2 gps unit, to use on a 22mm accessory bar. Uses the OEM quickrelease bracket. Requires 4 M4 nuts.
Swirl flaps removal plugs for BMW M57 diesel engine, 22mm. You'll need 6 of these + orings. Make sure to use high temperature resistant material like Nylon. Original orings should work fine, I used a bit bigger ones though. Designed with…
Fence Post Topper Remix 1/2 In Pipe 1/2" ID 22mm OD
Needed some small wrench for soft tightening parts in wise, yeah, i could make it simple, but why? This looks better and if i will brake some part of it, i can only print the one broke part. Hope someone will use it as much as me. You…
Garage door remote holder for motorcycle handlebars (22mm.)
Simple to print phone mount adapter for 22mm diameter handlebar. It uses an existing phone mount from Aliexpress or Temu which costs around 5€. Just split the model in your slicer. Only one part needs a bit of support (check picture for…
Model of the 9x22mmR Type 26 cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
No more unstraps! Easy to print - no support needed! To use with 20mm/22mm (select appropriate file) 2.5mm thick straps / watch bands. FreeCAD file included. Update(2023-04-10): added STL for 22mm straps
Hook clips on pipe I m printing with 4 walls and 10% infill in PETG
Spare part / Ersatzteil Ironing board foot / Bügelbrett Fuß 22mm → 0.4 Nozzle → 0.2mm Layer Height, → 25 - 50 % infill, → TPU
Introducing the ultimate tool hook designed for strength and versatility! This robust hook is ensuring it can hold a wide variety of items—whether it’s gardening tools, workshop equipment, or sports gear. Engineered to provide maximum…
So first let me tell you that using bearings can cause filament spools turning to easily. This can also lead to problems but for me this has always worked out quite well. Probably because the spools have some resistance in rubbing against…
For more precise details, please refer to the STEP file. Unlike an STL, which can lose subtle design nuances, the STEP file reveals the exact details, particularly around the roundings of the base. The side parts include integrated…
My plastic piece of the strap broken, designed and printed this for repair. Intended for 22mm (my watch) but also I made a 20mm versio Printing instructions 0.10mm layer height (mandatory) 3 perimeters PETG , PETG+CF, PA, PA+CF….. you…
watch bend for 20 and 22mm watch, but stil easy to change that in slicer. If it does not fit good just add or remove one piece of it to the line and than you can littlebit change the lenght of it. suggestion: print with 50% infill 0.15…
I reworked the geometry from my Ninebot max charger mount to fit a 22mm handlebar and mount horizontally. The main hole is sized at 29mm, make sure to check your charger before printing. Print in PETG for resistance to material creep (Do…
Mount for an e-stop button needing a 22mm cutout for a Voron v2.4 300mm I used the “not that secure” method of connecting the e-stop to a free endstop pin on the MCU board and configuring it as a gcode-button in the printer.cfg:…
Ist eine Schelle mit 22mm, die mit einem Kabel Binder befestigt wird. Und hat eine Halterung um noch was fest zu machen.
This is a 2-part holder for standard 22mm felt discs used to diffuse scents from essential oils. I specifically made this so I could set one or two of these discs in my car's cupholder and not risk getting sticky essential oils…
I'm a big fan of the filament swatches in slide format https://www.printables.com/model/269408-filament-swatches-that-fit-in-a-slide-tray-or-caro There are lots of different boxes for this (at least here in Germany) and also very nice…
This 3D model is a custom-designed standing dustpan head, created to fit a standard 22mm diameter broom handle (handle not included). Designed for use in a standing position, this dustpan model features a vertical handle socket to provide…
This improved version of the original cable holder is designed to clamp onto tables up to 22mm thick, making it even more versatile. The edges have been smoothed for a sleek, polished look and better usability. Perfect for managing cables…
A remix of CreamyWhites work available here . After taking this mount off and on a couple of times, the threads in the plastic started to degrade. My initial reason for printing this was that the swytch kit battery on my bike blocks any…
All the other clamp parts fit and can be reused. The clamp screw had to be turned out very far to clamp onto my 22mm desk. There was more flex on the screw that I was comfortable with, so I made the clamp gap smaller to fit the desk. In…
This custom-designed bike light holder is tailored to securely mount Hope Tech lights onto 22mm handlebars, ensuring stability and reliability during your rides. Features: Precise Fit : Engineered specifically for 22mm handlebars,…
My printer setup: 0.15mm layer height for a good quality of the threads PLA+ (but with PETG it would be more elastic and robust) no supports 15% gyroid infill Mount it to the 22mm handlebar with two M6 screws and wrap around your watch.…
Adapter kitchen faucet to Gardena coupling I use it myself to attach a hose when cooling my beer brewing. Don't forget a rubber gasket between the adapter and the faucet.
Halter für das SC-E7000 Display. Klemme 22mm Noch in der Testvariante da paar Dinge Korrigiert werden müssen aber os funktioniert es schon. V2. ist in Bearbeitung.
Our 2023 RAM Promaster has a 22mm hole in front of the sliding door. I made these hole plugs with an s-hook hole in them to hang light items. I printed them in Fillimentum FillFlex 98A with support on the plate Things I used: Fillimentum…
This is a quick release clamp for posts with 22 outer diameter. The original clamp on our sun protection umbrella broke - this is the replacement. The lever need to be printed with supports; Ball head needs to be tapped with thread M5 and…
Kabelhalter für Ikea Mittzon Tischplatte oder andere Holzplatten 22mm und 18mm. Für USB Kabel und HDMI
The template guide provides a 22mm sleeve through which the trimmer bit passes, allowing use of the trimmer with template patterns. The original Makita template guide has a 10mm sleeve, allowing a perfect match with the 22mm template…
Its designed for a tube from Aquael that has 22mm diameter. Tolerance is 0,5mm to fit well
in my toolbox i have small bottles for isopropyl alcohol, distilled water and water with detergent. i made this gridfinity holder to store these small bottles. I use these 10ml bottles from Aliexpress:…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
Tube or neon holder 22mm, wall mount, 4mm hole for screw. Both versions can be printed without supports, but for better strength I recommend printing the reinforced version with stiffener supports.
An update of a great organiser to your shower. Previous print version has saved many bottoms. This one will save many more and also prevents your back from unnecessary bending. This organiser is nicer than previous version, still can…
Shorter band, and a less intrusive lock ring compared to the original. Can print on the side, but if the holes rip, better to print it flat for strength.
Hi! I designed this support bracket for shelves in my son's room, since kids tend to use furniture as climbing equipment. The bracket is designed for 22mm round wooden dowels and includes screw holes on the side for securing the dowel,…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl Key Features: -Non-slipping 16mm clamps with TPU inlay -Rotatable in three…
The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead. This template is use to drill 2 extra holes on standard 22mm nut so you can mount it on the stock(or bear) X axis. Use 3.2mm drill bit is…
This version is outdated, use this drill template : https://www.prusaprinters.org/prints/115469-prusa-22mm-to-25mm-leadscrew-nut-drill-template The prusa use 25mm leadscrew nut, which is very hard to find for anything other than 8mm lead.…
first upgrade for: 16mm Strongsnap MXG_1 M3x16mm screws and nuts are required upgrade to version 3 ! this is the final version. it has a separate OUTER_PART wich gives extra strength to the clip, print it with perimeters only
Hello everyone here is another one from series clay playdoh fun. this time wanted to make something mechanical as learned recently some gear stuff. there we have outcome adjustable roller/press for equal layer of clay or playdoh. designed…
I am too cheap to buy 27mm sockets to remove the Explorer filter. 22mm is the biggest I have.
I used the Voron V0.2 Master Assembly Fusion 360 model and added a 22.15mm hole to the rear skirt so that I could add a switch for my LEDs.
A connection piece for the gardena combisystem. Used in this example with a 22mm diameter base to glue/attach For attaching a tool to a gardena combisystem handle. Forces on these parts can be quite high, so pick a strong material, and…
Printing For a tight fit the parts need to be printed separately. The tolerances for a print-in-place model were too large. No supports required. Assembly Simply put snap the inner ring section into the larger one. Make sure, that the…
Large Radius Fillet Gauge | CAD Tool This fillet gauge is designed to measure round corners (fillets) on objects, making it an essential tool for CAD modeling and reverse engineering. Unlike most fillet gauges, which focus on smaller…
About This is a blind plug to close unused ø22mm button/indicator mounting holes in control panels and other industrial operating stations. The blind plug is designed for a panel thickness of up to 5mm. This blind plug is not watertight…
