1 / 4
16mm or 19mm tent pole to 22mm PVC holder for scrog net — image 1
1 / 4

16mm or 19mm tent pole to 22mm PVC holder for scrog net

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For 16mm or 19mm grow tent poles. Used for scrog or to reduce negative pressure wall deformation. (updated 8/29/2022)

Rating
5 / 5
Likes
86
Downloads
683
Makes
3
Views
3,680
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Best printed with PETG for it's flexibility.  PLA works too but may be more difficult to snap on the tent pole.  I've had luck with infill anywhere between 10-30%.  This was designed to print easily with no supports needed.

 

Updated 9/12/2022: 19mm version tested and reported as good.

 

Updated 9/1/2022:  Added 19mm tent pole version by request.  I have not tested it as I do not own a tent with a 19mm pole, so please let me know if there are issues. Thanks.

 

Updated 8/29/2022: Sorry I didn't notice the non-manifold geometry.  That has been fixed and all internal geometry is also removed.

 

These brackets are designed for 16mm grow tent poles and ½ inch diameter PVC.  Typical uses are for scrog nets and/or added tent wall structure. 
 

Updated 5/17/2025:
I get request for different sizes, so now you can make your own adjustments. 
Scog_bracket.FCStd is a FreeCad file you can use to customize your bracket.
Please see scrog_example1 to see which sketches you can use to modify the vertical cylinder part.

Tags