1 / 5
22mm herringbone planetary gear bearing or a fidget — image 1
1 / 5

22mm herringbone planetary gear bearing or a fidget

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

22x7x3 gear bearing. Apparently it is also fun to spin as a fidget.

Rating
0 / 5
Likes
22
Downloads
217
Makes
1
Views
1,095
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

After seeing some of the gear bearings I was impressed with their designs.  So, I played with a few of my own.  Then I saw several models that needed 22x8x7 ball bearings, so I wondered if a working gear bearing could be made that small.  That resulted in this build.  It is 22mm in diameter and is 7mm wide.  I decided to make the center hole a 3mm hex.  Before printing, I thought I might need to reduce the line width but I was unsuccessful with adhesion with both PLA and PETG.  So, I went back to the defaults with a 0.4mm nozzle and PLA, with the textured PEI plate, and to my surprise it printed in both silver silk and white basic.  I did select to build with 100% infill which with this small a part, I am not sure it made any difference.  When I inserted the 3mm hex driver, gave a quick turn and they broke away without a hitch.  The second time I printed I used normal support with one layer of raft.  It made for a cleaner look and was easy to remove.

I would love to hear if anyone can modify their build to use these instead of ball bearings.  Please provide any details of different filaments and different settings.  I had already ordered a 0.2mm nozzle because I didn't think this would actually work.  I will probably try it with the smaller nozzle when it comes in.

Good luck and I hope to hear and see some results.

By the way, people have commented that is a fun fidget. Especially if you print it at 200 or 300%

1/30/2024: I added a 3MF, a STEP, and a STL file to add in printing or modifying.

Tags