1 / 5
22mm herringbone planetary gear bearing or a fidget — zdjęcie 1
1 / 5

22mm herringbone planetary gear bearing or a fidget

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

22x7x3 gear bearing. Apparently it is also fun to spin as a fidget.

Ocena
0 / 5
Polubienia
22
Pobrania
217
Wydruki
1
Wyświetlenia
1095
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

After seeing some of the gear bearings I was impressed with their designs.  So, I played with a few of my own.  Then I saw several models that needed 22x8x7 ball bearings, so I wondered if a working gear bearing could be made that small.  That resulted in this build.  It is 22mm in diameter and is 7mm wide.  I decided to make the center hole a 3mm hex.  Before printing, I thought I might need to reduce the line width but I was unsuccessful with adhesion with both PLA and PETG.  So, I went back to the defaults with a 0.4mm nozzle and PLA, with the textured PEI plate, and to my surprise it printed in both silver silk and white basic.  I did select to build with 100% infill which with this small a part, I am not sure it made any difference.  When I inserted the 3mm hex driver, gave a quick turn and they broke away without a hitch.  The second time I printed I used normal support with one layer of raft.  It made for a cleaner look and was easy to remove.

I would love to hear if anyone can modify their build to use these instead of ball bearings.  Please provide any details of different filaments and different settings.  I had already ordered a 0.2mm nozzle because I didn't think this would actually work.  I will probably try it with the smaller nozzle when it comes in.

Good luck and I hope to hear and see some results.

By the way, people have commented that is a fun fidget. Especially if you print it at 200 or 300%

1/30/2024: I added a 3MF, a STEP, and a STL file to add in printing or modifying.

Tagi