Liczymy pasujące modele…
These are holders/caps to add to this model to make it easier to spin in your hand: https://www.printables.com/model/126060-fidget-drive I really liked this fidget spinner, but wanted some holders to make it more satisfying to spin in my…
Ein Lego kompatibles Herringbone Zahnrad, dass eine dicke von 2 Noppen aufweist und auf eine reguläre Lego Technik Stange passt. Dieses Modell wurde von mir mit einem Infill von 15% und ohne Support mit PLA gedruckt.
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Author: Emmett Lalish Print instructions Print takes roughly 3 hours at 100 µm layer…
Adjustable phone stand with spring-loaded hinge and mechanical lock. The curved herringbone contact surface supports the device across a wide area while maintaining grip and controlled positioning. The indexed side knob compresses the…
Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…
This is my first published model, it took lots of prototyping and works really well. I hope you enjoy it.
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Author: Emmett Lalish Print instructions Print takes roughly 6 hours at 250 µm layer…
No supports necessary for gears Print as many gears as you want, up to 8 or 9 can reasonably fit Use a brim on the rods
Introducing the “Large Planetary Herringbone Gear Fidget Spinner” that is a print in place fidget. This fidget has nice tight tolerances and is 15mm wide and I have had success printing it at 6mm wide (see cover photo) if you want a…
Hello Fidget friends! This is my 9th version and the first one I upload here. I think by now everything is perfect. For the finished fidget you need the following parts: - 1x part 1 (printed in the first color) when slicing the part I…
This is a simple model inspired by herringbone gears and designed to work as a flower pot cover. It fits standard plastic pots up to 11 cm in diameter. Print instructions I just used the standard profile for Prusament PETG, vase mode and…
This is hybrid between a tapered roller bearing, a herringbone gear set and a spiral bevel gear. it is ideal for use as a turntable roller bearing, taking mainly axial loads. It is self retaining/aligning with the parts kept in place…
This is a further improved version of the herringbone gear-bearing design I've seen around. This design has a backlash of 0.25mm. It has a slightly chamfered lip to reduce the play in it and make it more stable. So that you can use this…
Herringbone Gear Rack Pinion Linear Rail Guide and it works quite well! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusament PLA black How I Designed This…
Tarmo5 herringbone gear with two PINION_GEAR(C08) options: 10 mm OD Main Drive Gear Adaptor 11 mm OD Main Drive Gear Adaptor Requirements: Socket Set Screw M3 x 10mm or M3 x 12mm (may fit longer screw but need to check clearance between…
For a project, I required gears. My 3d modelling program (Shapr3d) does not support generating gears, so I had to search for existing models (creating them by hand is quite tricky, especially when they should reliably mesh). I could not…
I printed this with 3 walls, no infill, no top layers, and a .2mm layer height.
This model is a combination of two fantastic 3D models: Emmet's Herringbone Planetary Gear bearings and Martin Majewski's Spool Holder . The motivation behind this project was simply to remove the need for store bought 608 bearings. These…
This model is based on the eccentric cycloidal drive. for this model you would need: 4x 608 bearings(the same ones that are in fidget spinners and skate board wheels). 2x m3 screws that are no more than 30mm long. and all 5 of the printed…
One of the sample models for the Prusa CORE One+ INDX 4T/8T. This is the popular print-in-place herringbone gear mechanism in a 4/8-color version. It can be easily printed with the default settings at a layer height of 0.15 or 0.2mm.…
Added the necessary aspects to make this a herringbone gear. Angle sketch wraps around the cylinder to create a 3d sketch that is used to sweep the tooth. Angle sketch should stay the same for different gear tooth counts. v3 now includes…
I have spent a lot of time programming the geometry of the gears to achieve the correct tooth profile. It is not just involute gears. The geometry is designed in such a way that it resembles how gear hobbing works. This makes it possible…
Dimensions: 248x332x278mm (22.9 L) Features: - Supports 2.5" and 3.5" drives - Allows for GPUs of up to 280 mm in length - Fits 2 92mm intake fans Print with PETG (I used SUNLU) and combine the segments with super glue. For assembly, you…
This is a low poly model of herringbone gear designed to work as a flower pot cover. It fits standard plastic pots up to 12 cm in diameter. Print instructions I just used the standard profile for Prusament PETG, vase mode and 0,2 mm layer…
After seeing some of the gear bearings I was impressed with their designs. So, I played with a few of my own. Then I saw several models that needed 22x8x7 ball bearings, so I wondered if a working gear bearing could be made that small.…
It uses 10mm aluminium pipes as shafts, four 6000RS bearings and one Emax GT2215 905KV 3S Motor.
Transform your Herringbone Planetary Gear from awesome test print and pretty-good fidget spinner into an awesome test print AND an awesome fidget spinner. Video meetings are boring without a fiddle-toy, but I was frustrated that this…
Adjustable phone stand with integrated spring-loaded clamp and mechanical lock. The curved support and textured contact surfaces hold the device securely while allowing fast placement and removal. Angle adjustment is controlled through a…
Customized version of http://www.thingiverse.com/thing:6544 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: distance_between_axels = 60 gear2_captive_nut_h =…
I used orange PLA Elegoo filament. Nozzle temperature 220 C. Bed temperature 60 C. Fan 100%. Speed 250 mm/s. For crank I used same parameters. Use a crank to break off the glued layers.
This is print in place. I didn't need supports. Printed on my Ender 3 V3 SE.
Fun little desk car with transmission for both wheels. If you print 2 then the gears all mesh nicely. Remix Info I played with radim3D's fidget on my desk for quite a while before thinking what it really needed was another big wheel so it…
Created a FreeCad model of the Herringbone Planetary Gear because the original was very low poly.
A quick solution if your print happens to be stuck; just pop it in like a key and twist to free the gears. I recommend printing with at least 4 walls/perimeters and 30% infill.
Four different herringbone gears: 0.5 module - 16 and 25 teeth. 0.7 module - 10 and 22 teeth. 1.0 module - 8 and 16 teeth. 1.5 module - 8 and 12 teeth. The offset for the pegs are 0.1mm, so you might have to sand them a bit depending on…
Motivation The original model is not big enough to hold it comfortably, if you have large fingers. This snap-on guard solves the problem. Printing instructions Use the Fuzzy skin with default settings (thickness: 0.3 mm, distance 0.8 mm)…
I don't know why but i really like to design gearboxes. This one has a ratio of around 126:1 and uses herringbone gears. It works pretty well and can be used for whatever purpose you want( use grease for better performance ) I also…
A reduced size remix of the herringbone planetary gear made to fit as an LCD knob. Includes a small nub in the middle because the outside spins freely. Note that this does take a little work to loosen up to spin freely. You can grip the…
20 & 30 teeth gears; module 1,2 (both); angle 45° (both); pitch diameter (20 teeth): 24mm pitch diameter (30 teeth): 36mm center distance 30mm; tight fit no support required
This print is for a core that will accept wooden pieces that will be turned on a lathe for a pen blank. There are plenty of other uses as well. If you scale it up, it can be a blank for handles (ice cream scoop, pizza cutter, etc.). I…
A Vented Herringbone-esque 1U 10-in Rack Blank
Please check your slicer's Slice gap closing radius!!! PlanetaryBearing_OD64_ID22_H10_S25P11x8R47_b30_e0.1 OD: 64mm ID: 22 Height: 10mm I recommend to print with regular PLA Silk PLA is a very difficult material choice for this part. Some…
⚙ Fidget Gear Ring V1 – Triple Herringbone Planetary Gear 🆕 Update – Ring Release Tool Included Since some users have experienced difficulties loosening the gears after printing, I have created matching two-piece ring clamps for every…
Chevron - Herringbone gear 30 teeth
Output of involute herringbone gear blank only. Not even a hole in the middle. Features true involute gear form, and proper corrected circular pitch diameter adjustments for a changing helix angle. Adjustable parameters: Pressure Angle…
Herringbone wood flooring for miniature models or doll house
Short Description: Immerse yourself in the world of precision engineering with this highly detailed Herringbone Planetary Gear/Bearing Set. This set includes six sizes and an optional HoneyComb design for an added aesthetic touch. Perfect…
We adapted it to use it on 5mm shaft motors, it's from the project: https://www.thingiverse.com/thing:1726861 If you'd like to start going even faster, take a look at our Advanced Aero Package video:
Project does not need any additional parts like bearings or screws. I have printed parts with 0.2 resolution but lower resolution will do fine as well. Supports are not necessary but may help with holes in base. I recommend using infill…
Remix of the Herringbone fidget spinner with gear teeth for easier spinning and grips that enable easier one hand spinning. For best effect add glue to inside of grips when adding on to the bar.
I got lots of binding on the original gears for the Mk6 recreator, even without a strip in the machine. So I thought a set of herringbone gears would help keep them from rubbing on each other and binding up. They are based on the stock…
A simple teaching aid for a herringbone gear.
Thanks Aviv for the neat fidget toy. Print everything in the parent print, except the “pinion knob” and the "pinion bearing support plug". This remix replaces those two files. This remix adds a bigger knob for the pinion gear (+20%…
it is motorized gearbox that increase the torque of the dc yellow motor
Requires use of the Spline XS 3D print adapter WCP-1021 from WCProducts.com Highly recommend printing with filaments that support mechanical resistance. PETG at a minimum, PA11 Nylon preferred
### ⚙ Upgrade your custom 3D-printed gearboxes to industrial-grade performance! Say goodbye to hunting for static STL files. If you are tired of trying to drill out tight shaft holes or snapping weak gear teeth under load, this fully…
As you turn the sun gear, the planet gears turn as usual, but the ring gear turns too, due to a second stage with different gear ratios. I designed this from scratch, but it's loosely based on Emmett Lalish 's design, with the same hex…
Herringbone Gears Category: Mechanical Toys
I was playing with Ross Korsky's HelicalGear add-in in Fusion360, and the help text said something about Sunderland or herringbone gears. I couldn't get the add-in to create one, so I create a gear, mirrored it, then stacked the mirrored…
There is no parametric model of the herringbone large gear so I remodeled it! Mod it to your needs.
A Herringbone Tessellation planter pot. A large planter pot with a simple angled facet design and circular plate. Drainage as well as non-drainage designs are provided. The planter has been tested with water over a 24 hr. period and did…
Greetings from Canada! ?share=copy&fl=sv&fe=ci I decided to try my hand at making a print in place bearing using a planetary gear system and herringbone teeth for stability. This is the end result and I am happy to say that it has worked…
There is no parametric model of the herringbone small gear so I remodeled it! Mod it to your needs.
Customized version of https://www.thingiverse.com/thing:6544 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: generate = 0 distance_between_axels = 50 gear_h…
Customized version of https://www.thingiverse.com/thing:6544 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: generate = 4 distance_between_axels = 60 gear_h…
Herringbone gear with shaft bore of 10mm, diameter of 50mm and width of 25mm. The shaft key slot is 2.5mm deep and 3.5mm wide
A fun herringbone gear fidget toy. Contains a 25 tooth gear and 20 tooth gear with indicators to help visualize the gear ration. Place both gears on the posts and then secure the top and bottom plates with a #6 fastener. Has the added…
A set of herringbone gears and a set of spur gears that are bolted to the mounting. The application is for researching 3D printed gears in my lower power go-kart /drive train assembly. I will post more information once I have printed and…
Fidget Gear Spinner – Triple Herringbone Planetary Gear | 6 Geometric Designs Discover the satisfying mechanics of the Fidget Gear Spinner , a unique 3D printable mechanical fidget toy featuring a triple herringbone planetary gear system…
I like herringbone gears because they doesn't slip apart when printed in place. With this gear I wanted to they to extend the concert of a herringbone gear.
It is a remix but I cant find the model it was based on on printables. This design has uniques N shaped herringbone like gears, which have the advantages of herringbone gears but cant be oriented differently to engage with themselves. to…
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Original Author: Emmett Lalish The following modifications were applied in order to…
This print in place model allows you have to most unique christmas ordament ever. Because of the structure this ornament is only able to be produced by a 3D-printer so you won't find anything similar hanging in your tree. Print…
Greetings from Canada! ?fl=pl&fe=sh This is a print in place fidget device or a nice little teaching tool - it is a herringbone double planetary gearset. Because of the herringbone teeth, this device holds itself together - no assembly…
PlanetaryBearing_OD64_ID22_H10_S29P7x9R43_b30_e0.1 OD: 64mm ID: 22mm H: 10mm I recommend to print with regular PLA Green and Blue colors generally are not as forgiving on tolerances. Silvers and bronze also can stick hard. white, orange,…
Monster truck wheel with herringbone tread. Reverse-engineered from the Monster Truck model. OpenSCAD source is provided for modification as desired. A smaller model with an M8 thread has been made, so that an M8 threaded rod can be used…
BUILD SEASON 3D Print replacement for SDS MK4n L2+ gears. 18T SplineXS Drive gear requires a WCP-1121 3D print adapter. 2024-01-08 UPDATE: Denbot MK4N L2+ 26T 52T 20DP Double Gear bearing clearance updated after finding the wrong value…
This is a hex key for the herringbone planetary gear . It was designed to give you more fun when playing with the gears.
Most planetary spinners hide a 608 bearing in the middle. This one doesn't need it — and that is the whole point of the design. The gears ARE the bearing Hold the center knob and flick the outer ring. Everything spins on the gear teeth…
Ein Lego kompatibles Zahnrad, dass eine Dicke von 2 Noppen aufweist und auf eine reguläre Lego Technik Stange passt. Dieses Modell wurde von mir mit einem Infill von 15% und ohne Support gedruckt. Ebenfalls passt das Modell zu dem…
Just a quick print I put together out of a childlike fascination with planetary gears and vase mode printing. Each of the gears in this planetary gearset are meant to be printed in vase/spiral mode without any bottom layers. This results…
This herringbone gear mechanism uses double-helical gears for smoother engagement and continuous motion. The angled tooth design helps reduce backlash and creates a visually satisfying movement when turning the gears. It features…
I remodeled the gears to be heringbone drive. This change made it necessary to also change the gearbox assembly.
No Bearings needed! Hardware Needed: M4x16 Socket Head screws and M4 nuts. 1 sided or 3 sided spinner Category: Mechanical Toys
May need to break it free once off the build plate
Dieses Modell ist eine Studie über Richtung und Lichtbrechung . Das Muster basiert auf einem Herringbone-Stil (Fischgrät), bei dem die einzelnen Segmente in unterschiedlichen Winkeln zueinander stehen. Dadurch wird das Licht in…
A simple solution if the printing stops working. Simply insert and twist like a key to free the gear. It is recommended to print with at least 4 walls/perimeter and 30% infill.
Customized version of https://www.thingiverse.com/thing:6544 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: generate = 3 distance_between_axels = 40 gear_h…
This gearing system is entirely print in place with a nice smooth motion. There are 2 STL's, a regular (with .2mm spacing that works well on will tuned machines) and a “loose” (with .5mm spacing that works with not so well tuned…
Customized version of https://www.thingiverse.com/thing:6544 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=6544 Instructions Using the following options: generate = 3 distance_between_axels = 40 gear_h…
Slide & Spin Herringbone version of the Big Key Fidgets Satisfying fidget toy with spin and smooth slide back and forth motion guided by a big key handle. Example printed in Amolen tri-color silk for effect but the model works with many…
This is a 5-color remix of the classic Herringbone Planetary Gear , designed for MMU (Multi-Material Unit) and multi-filament printers. Each gear has been color-separated so the motion is easy to see and more visually striking. The result…
Requires use of the Spline XS 3D print adapter WCP-1021 from WCProducts.com Highly recommend printing with filaments that support mechanical resistance. PETG at a minimum, PA11 Nylon preferred
my printer came with badly printed gears, i looked for some better ones but they didnt work, so i customized some to work i included the .scad file so you can edit them in openscad i added a file with the drop shaped holes in the large…
Fidget Gear Ring V3 – Triple Herringbone Planetary Gear 🆕 Update – Ring Release Tool Included Since some users have experienced difficulties loosening the gears after printing, I have created matching two-piece ring clamps for every ring…
Print the 4 components. I used variable layer height to get a good enough round axis. Assemble everything and glue the axis. Pictures are from the first prototype. I removed more of the gear to have a cleaner first layer. The model is…
herringbone large gear for taz single head extruders original model for taz6, print file are petg for durability
Planetary gear bearing that prints assembled and spins off the plate. Herringbone teeth keep it together. No supports. Sun + 3 planets + ring gear, printed in one go and already meshed Herringbone (30°) teeth: the gears can't slide out up…
About: Extremly tiny gears fidget test, only 10mm gear in diameter. This functional test needed to check the possiblity of printing tiny complex mechanisms and parts with your 3d printer. Tiny herringbone has a lot of detail and needs…
