1 / 2
Rotating Print in Place Herringbone Ornament (filament swap) — zdjęcie 1
1 / 2

Rotating Print in Place Herringbone Ornament (filament swap)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This print in place model allows you have to most unique christmas ordament ever.

Ocena
5 / 5
Polubienia
9
Pobrania
44
Wydruki
1
Wyświetlenia
341
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This print in place model allows you have to most unique christmas ordament ever. Because of the structure this ornament is only able to be produced by a 3D-printer so you won't find anything similar hanging in your tree.

Print instructions

The print requires two filament swaps at layer 0.3 and 7.7. In order to have the gears brake loose easily, make sure your first layer isn't to close to the printbed. Use a screwdriver to break the gears loose one by one by wiggling it using the hole.

Rotating in action: https://gfycat.com/ifr/BewitchedGloomyErmine

Based on Planetary bearing by stewartde

Tagi