1 / 2
Rotating Print in Place Herringbone Ornament (filament swap) — image 1
1 / 2

Rotating Print in Place Herringbone Ornament (filament swap)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This print in place model allows you have to most unique christmas ordament ever.

Rating
5 / 5
Likes
9
Downloads
44
Makes
1
Views
342
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This print in place model allows you have to most unique christmas ordament ever. Because of the structure this ornament is only able to be produced by a 3D-printer so you won't find anything similar hanging in your tree.

Print instructions

The print requires two filament swaps at layer 0.3 and 7.7. In order to have the gears brake loose easily, make sure your first layer isn't to close to the printbed. Use a screwdriver to break the gears loose one by one by wiggling it using the hole.

Rotating in action: https://gfycat.com/ifr/BewitchedGloomyErmine

Based on Planetary bearing by stewartde

Tags