Herringbone Planetary Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Herringbone Planetary Fidget Toys for young and old.
- Ocena
- 4,667 / 5
- Polubienia
- 173
- Pobrania
- 1222
- Wydruki
- 12
- Wyświetlenia
- 5950
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello Fidget friends! This is my 9th version and the first one I upload here. I think by now everything is perfect.
For the finished fidget you need the following parts:
- 1x part 1 (printed in the first color) when slicing the part I recommend to scale the 6 planet wheels {picture 4 the red ones} to 99% for X and Y, Z stays at 100%) the scaling can be between 98% and 100% depending on the printer and calibration, for me 99% worked best)
- 1x part 2 (printed in the second color)
- 1x optional tool (color doesn't matter, this "tool" is inserted in the middle of the finished fidget and clamped with the tang in the drill to "break in*" the fidget)
*break in
With the drill press, run the gear left and right for several minutes. Afterwards, I recommend adding some Teflon grease to the gear.
Finally, connect all four parts with some superglue.
Printer settings:
0.16 layer height
3 wall lines
15% cubic infil
PLA