Herringbone Planetary Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Herringbone Planetary Fidget Toys for young and old.
- Rating
- 4.667 / 5
- Likes
- 173
- Downloads
- 1,222
- Makes
- 12
- Views
- 5,950
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello Fidget friends! This is my 9th version and the first one I upload here. I think by now everything is perfect.
For the finished fidget you need the following parts:
- 1x part 1 (printed in the first color) when slicing the part I recommend to scale the 6 planet wheels {picture 4 the red ones} to 99% for X and Y, Z stays at 100%) the scaling can be between 98% and 100% depending on the printer and calibration, for me 99% worked best)
- 1x part 2 (printed in the second color)
- 1x optional tool (color doesn't matter, this "tool" is inserted in the middle of the finished fidget and clamped with the tang in the drill to "break in*" the fidget)
*break in
With the drill press, run the gear left and right for several minutes. Afterwards, I recommend adding some Teflon grease to the gear.
Finally, connect all four parts with some superglue.
Printer settings:
0.16 layer height
3 wall lines
15% cubic infil
PLA