1 / 8
MOTORCYCLE PHONE HOLDER 22MM & 25MM - WITH LOCKING MECHANISM — image 1
1 / 8

MOTORCYCLE PHONE HOLDER 22MM & 25MM - WITH LOCKING MECHANISM

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

MOTORCYCLE PHONE HOLDER 22MM & 25MM WITH LOCKING MECHANISM

Rating
5 / 5
Likes
40
Downloads
241
Makes
5
Views
2,431
Reviews
3

Updated at source:

Model information

License
Creative Commons — Public Domain

Motorcycle Phone Holder - With locking mechanism

This is a phone holder for all motorcycles with a 22mm and 25mm handlebar thickness. Designed with a locking mechanism similar to the Quadlock system.

Since I didn't find any FREE models that a was satisfied with, I started designing mine.

NOTE: Since this is an outdoor model suggested material for printing is PETG or even better ABS if you have the ability to print with it.
Also, please use quality DoubleSided Tape to avoid losing your phone.

Additional Materials that you need are:
- 2x XMH 5.8 20mm screws with washers and lock nuts
- 1x 4x25mm screw with washer and lock nut
- Quality DoubleSided Tape

Official version 2.0 is available from the 2nd of May 2023.

Happy printing

3D PRINTING SETTINGS

Version 2.0 for 22mm handlebar:
Layer height: 0.2mm
Infill: 50%
Parameters: 3
Supports: Yes
Brim: Yes
The first layer in: ~24m
Print time: ~ 4h30m
Filament consumption: ~42g ~14m

Version 2.0 for 25mm handlebar:
Layer height: 0.2mm
Infill: 50%
Parameters: 3
Supports: Yes
Brim: Yes
The first layer in: ~29m
Print time: ~ 5h50m
Filament consumption: ~58g ~19.5m

Tags